User’s Guide
Contents 1. Introduction 2 2. Battery Precautions 3 3. Getting Started 4 4. Installation Operation 5 5. Cable Connection 6 6. Bluetooth Connection 6 7. Function Guidance 7 8. LED Display Status 8 9. Battery Charging 8 10. Product care 8 Please read the following safety warnings and precaution before using your device.
Specification E-2 Load impedance: 32Ω S/N: ≥85dB Frequency range: 20Hz-20KHz Power supply: Lithium battery or USB cable Audio source: iPhone, iPad, Smartphone, Notebook, MP3, MP4, etc Function spec: Bluetooth, Microphone, Size: 156x73x97mm Operating range up to 10 meters. 1. Introduction Thank you for purchasing our Bluetooth headphone: E-2. This device can be easily connected with Smartphone, tablet PC and other devices via Bluetooth during your traveling and daily usage.
2. Battery Precaution The device is powered by a built-in rechargeable lithium battery. If the device is not used for a long period, the battery may be out of power. Please charge the battery before using. Rechargeable batteries are only to be charged under adult supervision. Use only the supplied cable to charge the battery. Improper charging may damage the battery and the device. Do not attempt to open the rechargeable battery or battery pack. There are no serviceable parts inside.
3.
4. Installation Operation Step . 1 Step . 2 put on this headphone Adjustable length Step . 3 It can be adjusted To be fit by twisting the left and right ear muffs.
5. Cable Connection USB for power 6. Bluetooth Connection Pairing headphone to your Smart device (Smart device should be within 10 meters of your headphone). 1. Activate pairing mode on headphone by long pressing” ON/OFF” button until you hear two kinds of short music. The LED will flash in blue and red. 2. Turn on your device, navigate to the Bluetooth function (refer to the device owner’s manual to locate Bluetooth function). 3. Select “Set Up” Bluetooth or turn “ON” Bluetooth. 4.
7. Function Guidance Play music from your phone Button Operation Function Long Press Volume up Short Press Next song Long Press Volume down Short Press Previous song Short Press Play/Pause, Answer/End a call Long press Ready for pairing Answer /end a call Press “ ” (the middle button)to answer or end a call. 8.
. Battery Charging The device has a built-in rechargeable battery. This can be charged by USB cable connected with your computer. When it’s charging, the light below the left button will turn to red After charging, the device can be used without the power connection. Charge the device again when you hear the headphone make successive beep sound. 10. Product care Your device is designed to be light, compact and durable. As an electronic device it must be treated carefully.
FCC NOTE： This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. THE MANUFACTURER IS NOT RESPONSIBLE FOR ANY RADIO OR TV INTERFERENCE CAUSED BY UNAUTHORIZED MODIFICATIONS OR CHANGE TO THIS EQUIPMENT. SUCH MODIFICATIONS OR CHANGE COULD VOID THE USER’S AUTHORITY TO OPERATE THE EQUIPMENT.
