User’s Guide FCC ID: 2AB5T-E6
Contents 1. Introduction 2 2. Battery Precaution 3 3. Getting Started 4 4. Installation Operation 5 5. Cable Connection 6 6. Bluetooth Connection 6 7. NFC Connection 7 8. Function Guidance 8 9. LED Display Status 8 10. Battery Charging 9 9 10 11. Product care 12. User Manual Please read the following safety warnings and precaution before using your device.
Specification E6 Load impedance: 32Ω S/N: ≥75dB Frequency range: 20Hz-20KHz Power supply: Lithium battery or USB cable Audio source: iPhone, iPad, Smartphone, PC, Laptop etc. Size: 156x73x97mm 1. Introduction Thank you for purchasing our Bluetooth headphone: E6. This device can be easily connected with Smartphone, tablet PC and other devices via Bluetooth during your traveling and daily usage. It will bring you an easy lifestyle.
2. Battery Precaution The device is powered by a built-in rechargeable lithium battery. If the device is not used for a long period, the battery may be out of power. Please charge the battery before using. Rechargeable batteries are only to be charged under adult supervision. Use only the supplied cable to charge the battery. Improper charging may damage the battery and the device. Do not attempt to open the rechargeable battery or battery pack. There are no serviceable parts inside.
3.
4. Installation Operation Step . 1 put on this headphone Step . 2 It can be adjusted To be fit by twisting the left and right ear muffs.
5. Cable Connection Aux in USB cable for power 6. Bluetooth Connection Pairing headphone to your Smart device (Smart device should be within 10 meters of your headphone). 1. Activate pairing mode on headphone by long pressing” ON/OFF” button. The LED will flash in blue. 2. Turn on your device, navigate to the Bluetooth function (refer to the device owner’s manual to locate Bluetooth function). 3. Select “Set Up” Bluetooth or turn “ON” Bluetooth. 4. Select “Search” or “Discover” devices. 5.
7 -7-
8. Function Guidance Play music from your phone Button Operation Function Long Press Volume up Short Press Next song Long Press Volume down Short Press Previous song Short Press Long Press Play/Pause, Answer/End a call Power on/off Answer/End a call: Press “ “ to answer or end a call. Short press ‘’ “ two times, you could make the last record call. 9.
. Battery Charging The device has a built-in rechargeable battery. This can be charged by USB cable connected with your computer. When it’s charging, the light will turn to red. After charging, the device can be used without the power connection. Charge the device again when you hear the headphone make successive beep sound. 11. Product care Your device is designed to be light, compact and durable. As an electronic device it must be treated carefully.
12. User Manual NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
