Owner’s Guide Bedienungsanleitung Notice d’utilisation Guía del usuario Manuale di istruzioni E9 ANC Wireless Headphones FCC ID: 2AB5T-E9
I M P O R TA N T S A F E T Y I N S T R U C T I O N S Please read and keep all safety and use instructions. WARNINGS/CAUTIONS • Do NOT use the headphones at a high volume for any extended period. – To avoid hearing damage, use your headphones at a comfortable, moderate volume level. – Turn the volume down on your device before placing the headphones in/on your ears, then turn the volume up gradually until you reach a comfortable listening level.
REGULATORY INFORMATION NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
REGULATORY INFORMATION This symbol means the product must not be discarded as household waste, and should be delivered to an appropriate collection facility for recycling. Proper disposal and recycling helps protect natural resources, human health and the environment. For more information on disposal and recycling of this product, contact your local municipality, disposal service, or the shop where you bought this product.
CONTENTS What’s in the Carton Contents ................................................................................................................................ 6 Headphone Controls Power on ............................................................................................................................... 7 ............................................................................................................................... 7 Headphone functions .................................
WHAT’S IN THE CARTON Contents Confirm that the following parts are included: COWIN E9 active noise cancelling Bluetooth headphones Carry case 3.5mm to 6.5mm audio converter USB cable 3.5 mm audio cable Airline headphone adapter Note: If any part of your product is damaged, do not use it. Contact your authorized COWIN customer service. E-mail: support@cowinaudio.com Phone: +1 (929) 359-6668 ( Mon-Fri 9:00 a.m. to 5:30 p.m. PST ) Recommend Website: https://www.cowinaudio.
HEADPHONE CONTROLS Power / Noise cancellation On/Off switch Volume up / Skip forward button Play / Pause / Call control button Volume down / Skip backward button Audio jack USB charging port Power on Press and hold for 2 seconds. You hear the power-on pairing tones. Note: Noise cancellation is enabled when the power is turned on, and there is no ANC IS ON tone. Power off Press and hold for 2 seconds. You hear the power-off tones.
HEADPHONE CONTROLS Headphone functions Media playback and volume functions The headphone controls are located on the right earcup. Function What to do Play /Pause Short press the Multi-function Pairing Long press the Skip forward Long press the button Skip backward Long press the button Volume up Short press the button Volume down Short press the button button button 2 seconds Call functions The Multi-function button and microphone are located on the back of the right earcup.
NOISE CANCELLATION Noise cancellation reduces unwanted noise providing a clearer, more lifelike audio performance. You can choose the noise cancelling mode based on your listening preferences and environment. Noise cancelling modes 1. Press and hold for 2 seconds in the power off state,the voice prompts POWER ON pairing, and the noisereduction is turned on at the same time. 2. Click the noise cancellation button once in the power on state to switch the noise reduction on and off.
STATUS INDICATORS Indicator Light Display System status Solid green Noise cancellation ON Indicator Light Display System status Solid blue Bluetooth is connected Flashing blue Bluetooth is disconnected Indicator Light Display System status Solid red Charging Note: If connected to an Apple or Android device, the device displays the headphone battery level near the upper right corner of the screen.
BLUETOOTH CONNECTIONS If you still have issue, contact COWIN customer service. E-mail: support@cowinaudio.com Phone: +1 (929) 359-6668 ( Mon-Fri 9:00 a.m. to 5:30 p.m. PST ) Recommend Website: https://www.cowinaudio.com (Support live chat) Facebook: https://www.facebook.com/cowinelectronics Instagram: https://www.instagram.com/cowinaudio Youtube: https://www.youtube.com/channel/UCQIHuG8eYKa8AFyzOa98RiA Twitter: https://twitter.com/cowinaudio Disconnect a mobile device 1.
WIRED CONNECTIONS Connect the audio cable Use the 3.5 mm cable (provided) to connect a non-wireless device or to continue using the headphones. 3.5mm 6.5mm 3.5mm to 6.5mm Audio Converter Airline Headphone Adapter CARE AND MAINTENANCE Store your headphones Place the headphones flat into the case. Notes: • Make sure to power off the headphones when not in use. • Before storing the headphones for more than a few months, make sure the battery is fully charged.
TROUBLESHOOTING Common solutions If you experience problems with your headphones: • Check the state of the status indicators (see page 10). • Charge the battery (see page 9). • Increase the volume on your headphones, mobile device and music app. • Try connecting another mobile device (see page 11). If you could not resolve your issue, see the table below to identify symptoms and solutions to common problems. If you are unable to resolve your issue, contact COWIN customer service.
Symptom Solution Bad Bluetooth connection • If the Bluetooth signal is weak, out of range or interferes, the Bluetooth® wireless connection may fail or the sound cuts in and out. Please see the information below to improve signal quality and reduce the possibility of interference. • The Bluetooth wireless connection may fail or the sound will continue to cut in and out due to weak Bluetooth signals or external signal interference. Please be away from any interference or obstructions.
Symptom Solution No sound from a device connected by the back-up audio cable • Secure the ends of the back-up audio cable. • Increase the volume on your headphones, your mobile device and music source. • Connect another device (see page 11). Poor sound quality from a device connected by audio cable • Secure the ends of the back-up audio cable. • Connect another device (see page 11). Battery won’t charge • Secure the ends of the USB charging cable. • Try another charging source.
