Use Guide

SMART WATCH Y8
SZOS
合格证
QUAL IF IE D CE RT IF IC ATE
型号：
（MO D E L )
(C H E C KE R )
检验员 ：
RoHS
On the key
the key
Full touch
display
The microphone
The horn
Heart rate
sensor
Charging a
10. Instructions for adding/deleting/playing music
1. First, you need to connect to the mobile APP.
2. Add music. Click the APP to enter the "Music" function
interface and click the lower left corner"Add Music", select
music in "Local Music" or "Cloud Music", clickThe check mark
in the upper right corner will download the selected music to
the deviceYou can view it in the "Music" function of the device
(required in the "Music" functionSelect "Watch Mode" in the
lower right corner of the function interface).
3. Delete music. In the "Music" interface of the APP, select
the one you want to deleteAfter music, click "Delete music" in
the lower right corner.
4. Play music. The device provides two modes: Watch mode
and Mobile modeIn the lower right corner of the music function
screen of the device, select the playing modeClick Play.
Bluetooth headphone mode is also available.
Note: According to the configuration,
do not carr y this function ignore!
12. Frequently Asked Questions and Answers
Why does blood pressure value have deviation with sphygmomanometer?
The deviatio n between the watch and the sphygmomanometer is due to a number of factors
,Sphygmoma nometer measurement site is i n the cerebral artery, the watch measurement
site is in the arteriolesThe two main bra nches, normal aortic blood pressure measurements
and microarterial bloodPressure measurements can vary by three to forty; If you use a
watch and a blood pressure monitor at the sam e timeTo measure, because the blood is
flo wing in the art ery in the direction of centrifugation, a sphygmomanome terWhe n
measuring, the band puts pressure on your elbow below the center, temporarily bleedin
The fluid does not flow smo othly to the underlying branches of the ar teries; Increased
vascular tension,Will make the upper and lower blood pressure measurement value
deviation will be greater.
Why not wear a watch to take a hot bath?
The temperat ure of the bath water is relative ly high, which produces a lot of st eam, andAnd
water vapor is gas phase, its molecular radius is small, easy to watch the shell emptyThe
gap seeps in, and when the temperature drops, it recondenses into liquid droplets,Easy to
cause the watch internal circuit short circuit, da mage to the watch circuit board, and
damageA watch.
Why can't the watch receive notifications?
Android phone Settings:
1. Ensure that t he message push function is ena bled on the mobile client
2. The c onfirmation message is displayed normally in the notific ation bar of the mobile
phone and is pushed to the watchIt is pushed by reading the notification message on the
mobile phone. If the notification bar does not existMessage, the watch will not be able to
receive push. (You need to find Tong in your phone 's SettingsKnow the Settings, turn on the
notification switch of wechat, QQ, phone, SMS and mobile phone client)
3. Open the auxi liary function Settings of th e wristband client (find the aux iliary function in
the mobile phone Settings)Function, ope n the function setting of the bra celet client)
Iphone Setti ngs:
1. Ensure that t he message push function is ena bled on the mobile client
2. The confirmation message can be displaye d in the notification bar of the mobile phone
Normal display, (need to find the notification Settings in the phone Settings, open micro
Notification switch for letter, QQ, phone, SMS, mobile phone client)
Use guide
Warranty card
Product Name:
Name of Customer:
Contact Number:
Model and Specification:
Address:
Distribution Unit:
Contact Number:
Address:
Date of Sale:
11. Precautions
1. Do not severely impact the host.
2. Do not touch benzene, diluent and other chemicals.
3. Please keep away from strong magnetic field and electric
shock station.
4. Keep away from direct light or heating appliances.
5. Do not disassemble, repair or transform by yourself.
6. Waste packaging, batteries and old electronic products
should be sorted and properly disposed of.
7. Do not wear it in the shower. (Temperature shall not
exceed 45℃)
1. Appearance description
Thank you for choosing our smart health watch. Please read it carefully before using
it for the first timeRead the instructions; First, long press the main function button for
3 seconds to sta rt the machine, if the power is low o r consumedYes, please charge it first.
2. Charging instructions
Af ter connecting the charging socket, inser t the USB interface (such as computer host,
por table power supply,Or a standard power adapter) for charging, requiring an input
voltage of 5V1A or 5V2A.
As shown in the picture below:
3.Install "SZOS" APP
Before using this device, please download the "SZOS" APP on your mobile phone and
Do the installation. You can do this by using the "scan" in wech at or browser
Fu nction Scan the QR code of "Download APP" on the device and se lect the
corresponding one on the mobile phoneThe operating system can be downloaded and
installed; You can also browse the ap p in the App,Search "SZOS" in app st ores such as
Google and AppStore
Download and install.
Watch interface can be scanned code download
4.Connect the watch
(1) Scan code co nnection
After you download the APP, enter the APP and click the upper right corner and select
Select the "sweep" function, press the button on the watch to enter the dial interface,
Afte r swipi n g to th e right o n the le f t side of the di a l, cl i c k "C o n nec t phone"
Button, the tw o codes connected to the mobile p hone will pop up, and then use the APP to
scanTrace this two-d imensional code and allow pairing. If your mobile phone is ios
Unified, after the comp letion of the step, according to the MAC device in the Bl uetooth
Address will classic Bluetooth connection (MAC address available in "Settings - About
Watch ".
(2) Manual connection
After Bluetooth is enabled on the phone, enter the app, click the "Device" page, and click
Click "Add Device" then click the icon that appears, and finally click "Pair"At this point, the
APP will automatically searc h for nearby devices, you just need to find t he place
Have the name of the device, click to match.
5.Connection status
When you finish t he appeal operation, slide at the top of the device dial interface, will
The "Bluetooth" icon is filled, indicating that the con n e c t i o n is su c c e s sful.
As shown in the picture below:
6.language
The equipment is available in many languages,
inc lud i ng : Si m pl i fie d Ch i ne s e, E n gl i sh , Fr e nc h ,
Italian, Por tuguese, WesternBanja, Polish, Russian,
Thai.
7.Dial style selection
1, the equipment itself provides a variety of d ial for you to choose.When ligh ting the
device, you can long press the dial interface of the device to enter the cutting
Change the dial style function, sliding around can feel different dial style, when
Once yo u have selected the dial style you want to use, click on the dial to proceed
Replacement; You can also click the "Settings" function on the device and select
Select "Scre en Display" Select "Change di al" function to replace the dial.
2. The "dial Market" in the APP will give you more choices.When you use the APP to
connect to the w atch, it is available in the APP's " watch faceMarket "for downloading
more types of di al, but also for dialDelete it.
3. The APP also provides the function of customizing the dial.You can customize the
dial in the "Device" function of the APP.
8. Watch operation instructions
1. Sidebar: Sl ide to the right on the left side of the dial interface to pull out the si de
Sidebar, provide a variety of shortcut function entry.
2, pull down panel: at the top of the dial interfac e can slide, you can pull out
Drop - down panel, provides a variety of shortcuts to function entry, and provides time
, Bluetooth co nnection status, power disp lay.
3. Slide the notification up at the bottom of the no urishing surface of the dial to v iew
the receivedNotification message of; Cli ck the corresponding messag e to view or
delete it.
4. Menu page: press the side key on the dial page to enter the menu page.After
entering the menu page, double press the side button to switch the menu style.
A one-sided key returns to the main dial page.
5. Function pa ge: Click the icon of each application on the menu page to enter the
corresponding pageFunction, right slide back single press the side key to return to the
main dial.
9. Function introduction
Exercise: in cludes outdoor running, outdoor walking, indoor cycling, indoor running,
Indoor walking, free exercise, a total of six r outine exercise.
Heart rate: Pu t the watch close to the wrist, you can measure the real-time heart rate
value, histo rical measurementThe results can be viewed in the APP.
Blood oxygen saturation: the watch close to the wrist, you can measure the bleeding
oxygen value, calendarThe historical measurement results can be checked in the APP.
Blood pressure: Put the watch against the han d bowl, you can measure the blood pressure.
Activity rec ord: Record the movement data o f the day, including the number of steps and
the time of the ac tivityAnd calories.
Sleep: Detec t your sleep condition every night, sleep related data can beCheck it out
in the APP.
Music: Supports mobile phone music.
Weather: After connecting the app, you can actually update the weather of the day.
Take photos: Enter the APP after connecting the app and click the photo function
on the watch.The phot o taking function of APP side can be evoked to realize remote
control of photo tak ing. Click on theTaking a photo on ce can evoke the taking photo
function of th e APP. Click again to take a picture.The photos will be saved to the pho ne
system's alb um.
Payment code: When connecting the mobile phone, click this function to receive other
users directlyScan the code to transfer funds.
Friend Code: When the device is connected to th e mobile phone, click this function to scan
the code directly"Add friends".
Informatio n: After connecting to the APP, the notification received will be displayed here.
Stopwatch: The watch supports stopwatch timing
Timer: Supports the countdown of a selected number of minutes and a custo mized time.
Find the phone: When the device is connected to the phone, tap this function to fin d the hand
Operation of t he machine.
Call History: When connecting a mobile phone, you can synchronize the call history
of the mobile phone.
Common contacts: Connect mobile phones to s ynchronize mobile phone types
of contacts.
Dial: The wat ch calls when connected to the mo bile phone
Al voice: After connecting the APP, the hand can be aroused through the Al voice
function of th e watchMachine voice assist ant.
Settings: in cluding brightness Settin gs, screen-time, Do not distu rb mode, sound Settings,
Language switch, phone connection, about the watch, restart, restore factory,
Shut down and other functions.
Calculator: Provide calculation function, convenient and quick.
NFC: An eme rging technology. Devices (such as cell ph ones) that use NFC technology
Data exchange can be carried out in close proximity to each other and is made by non-contact
shotsFrequ ency identification (RFID) and interconnect technology integra tion evo lution.
Th r o u g h t h e I n t e g r a t e d i n d u c t i v e ca r d re a d e r, i n d u c t i v e ca r d a n d po i n t -t o - p o i n t
communication on a single chipWith the use of mobile terminals to achieve mobile payment,
electronic ticketing, access control,Mobile identity identification, anti-counterfeiting and
other applications.
Alipay: Click the watch Alipay interface to open, accor ding to the watch binding my
Watch interface prompts, complete Alipay account and watch binding, complete binding
After fixed, wa tch Alipay end will appear payment code, in support of Alipay payment field
So, please ask the cashier to scan the payment code, you can complete the payment.
configurations, some do not have local music player, Alipay,
Friend code sharing, NFC, blood pressure, blood oxygen function,
please refer to the actual configuration!
Full touch display
Used to provide display and touch function operation
On the key
Defa ult dia l inter face Access the menu. Do uble- click o n
the me nu to cha nge the s tyle. C lick on the non-dial inter fac e
to return to the dial in ter face
The key
Long p ress fo r 8 seconds to forcibly restart ; In the sh utdow n state , long pr ess
for 3 se conds to start up . In the de fault screen state, click Off. Oth erwise , the
scre en is on. L ong pre ss for three sec onds to b ring up the shutdown inter fac e;
The microphone
Voice transm issio n function. Durin g a conversati on, you speak in to a
micr ophon e, which will convert th e sound s ignal into an electrical s ignal
The horn
For sound output, the horn converts electrical signals
into electrical signals
Heart rate sensor
Measurement of human hear t rate and blood oxygen value
(Note: measurement with blood oxygen function)
Charging position
Af ter the charging cable is connected here, the unit can be charged