Product Specs

第 5 页 共 15 页
Packet and Wake-up frame

Transmit Beamforming
 Support S3/S4 AES/TKIP group key update
Peripheral Interfaces

Up to 15 General Purpose Input/Output pins
 Three configurable LED pins (mux with
GPIO pins)
PHY Features

IEEE 802.11ac OFDM
 IEEE 802.11n OFDM
 One Transmit and One Receive path

5MHz / 10MHz / 20MHz / 40MHz /
80MHz bandwidth transmission
 Support 2.4GHz and 5GHz band channels

Short Guard Interval (400ns)
 Sounding packet.
 DSSS with DBPSK and DQPSK, CCK
modulation with long and short preamble

OFDM with BPSK, QPSK, 16QAM,
64QAM and 256QAM modulation.
Convolutional Coding Rate: 1/2, 2/3, 3/4,
and 5/6
Bluetooth Controller
 Compatible with Bluetooth 2.1+EDR

Support Bluetooth 4.2 system
 Integrated MCU to execute Bluetooth
protocol stack

Supports all packet types in basic rate and
enhanced data rate
 Supports piconets in a scatternet
 Supports Secure Simple Pairing
Bluetooth Transceiver

Fast AGC control to improve receiving
dynamic range

Supports AFH to dynamically detect
channel quality to improve transmission
quality

Integrated internal Class 1, Class 2, and
 CCA on secondary through RTS/CTS
handshake.
 Support TCP/UDP/IP checksum offload

Generates 40MHz clock for peripheral chip.
 Single external power source 3.3V only

Maximum data rate 54Mbps in 802.11g,
150Mbps in 802.11n and 433.3bps in
802.11ac.
 Switch diversity used for DSSS/CCK
 Support STBC Receiving

Support LDPC Transmitting
 Hardware antenna diversity

Fast receiver Automatic Gain Control
(AGC)
 On-chip ADC and DAC
 Build-in both 2.4GHz and 5GHz PA

Build-in both 2.4GHz and 5GHz LNA
Class 3 PA
 Supports Low Power Mode (Sniff/Sniff
Sub-rating)

Enhanced BT/WIFI Coexistence Control to
improve transmission quality in different
profiles
 Bluetooth 4.0 Dual Mode support:
Simultaneous LE and BR/EDR

Supports multiple Low Energy states
 Supports Enhanced Power Control
 Supports Bluetooth Low Energy

Integrated 32K oscillator for power
management