Users Manual

■ Long press the power button for 3 seconds to power on the adapter.
■ Please keep the adapter and the cellphone in the range of 1 meters
if it's the first pairing.
■
The red and blue lights flash alternately when entering the pairing
mode after adapter power on ( if it doesn't enter pairing mode,
please long press the Vol"+" and Vol"-" button at the same time
for 2 seconds until the red and blue lights flash alternately)
*Please refer to the “Enter pairing mode” in “Basic Operation” table
on page 4.
■ Open the BT set on your cell phone or the devices with BT function.
Then search the BT devices and choose pairing name “ C15 ”.
Enter “0000” pin code if needed.
■ The blue LED flash slowly when it's paired successfully.
Note:
1.When the distance between the adapter and the BT devices is far
than 10 meters or 33 feet, the adapter will disconnect from the
devices.After that, once the they are in the range of 33 feet, they
will automatically reconnect.
2.If the headphones has paired, you can force the adapter “Enter
pairing mode” again which other cellphone can find the adapter
and connect it.
Pairing Method
Connect Two Devices
■ Follow the pairing method, pair the first cellphone and then “Enter
pairing mode” again to pairing the second cellphone.
■ Enter the cellphone setting interface of the first cellphone, and
connect the device C15 again.