Parts List

TWS earphone switch machine
Power on: when the charging box cover is opened, the
earphone will automatically start and reconnect the earphone
that has been connected before, the earphone that has not
been connected before or the earphone that has not been
successfully reconnected. Open the cabin cover and
automatically enter the pairing mode. At this time, it starts to
enter thepairing state of Bluetooth connection with mobile
phone. Open the Bluetooth interface of mobile phone and
search out the device named "G16C" of Bluetooth device.
After clicking, it can be connected successfully.
Turn off; the headset is turned off manually w hen the.
headset is on. Long press the button to touch the area for
about 5 seconds and there is a voice prompt and the light is
off. Then the headset will be turned off. Or put the earphone
into the cabin cover with "PowerOff" prompt when it is
turned on!
The microphone
Touch button area
The horn
Transparent cover
of charging bay
USB output port
USB output port
Transparent cover
of charging bay
Breathing lamp
Charging pod LED digital display flashing working status:
LED digital display power 00-100%
L / R headset display
Bluetooth display
Fully charged LED digital display 100, until pull out the
charging cable LED out
Before the first use, please put the earphone on the charging
cabin and connect the type-c cable to charge the earphone
Working status of charging bay：
No t e : wh e n cha r g in g t h e ch a r gi n g bin , t h e br e a th i n g la m p of th e
earphone will- also turn on. When the earphone battery is fully charged, the brea
thing lamp will turn off automatically.
Indicator light working status when the charging module is
charged to the earphone:
LED digital display power is about 100-00%
When both earphones are fully charged, automatically turn
off the power output
Note: the LED digital display is long and bright when charging
the mobile phone in the charging bay; The earphone
needs to be gently pressed and lowered smoothly to
avoid bad contact between the earphone and the
charging probe of the charging cabin, which will lead to
no charging.
Put the left and right earphones into the charging bay when
the machine is on. .
Close the cabin cover, and the earphone automatically shuts
down and enters the charging state.
The headphone LED breathing lamp lights up when it enters
the charging state.
LED goes out after full charge
L/R earphone basic operation mode
Rejected call:
Press the button area for 2 seconds_ in caller
status.
Answer/hang up the phone:
When the headset is connected to the phone,
click the touch button area..
Song switching up and down:
When entering music playback mode, press the touch button
of earphone L twice in succession to switch to the previous
track; Press the touch button of R earphone twice to switch to
the next track.
Music pause/play
Click the touch button area of earphone L
or earphone R when the earphone is
connected to the mobile phone.
Siri sensei:
In standby mode, press POWER 3S.Release when you hear
a drop.
(support bilateral calls, i.e. voice with two earphones, and
single earphone use)
When entering music playback mode, long press
the touch button area of earphone L to reduce the
volume; Long press the touch button area of R
earphone to increase the volume.
Volume plus or minus (+/-) :
Note: if pairing is not successful for a long time, please clear all
pairing records before Bluetooth on the phone, refresh the
Bluetooth interface of the phone, and re-search
"G16C" Bluetooth device name and click pairing
pairing
1. Correct way to wear: L is for left ear, R is for right ear
2. When the left and right earphones are used independently:
When the left and right earphones are used separately, they
can be used as complete and Independent Bluetooth
earphones respectively. Each earphone is paired with the
phone separately. (note: when used independently, please
use it outside the range of Bluetooth connection between left
and right ears.)
3. The left and right. earphones are used. simultaneously:
When the charging hatch cover is opened, the ear will
automatically start up and reconnect the earphone that has
been connected before, the earphone that has not been
connected before, or the earphone that has not been
successfully reconnected, open the cabin cover and
automatically enter the pairing mode. Open the Bluetooth
interface of the mobile phone and search out the device
named "G16C" of the Bluetooth device.
50 mAh
2000 mAh
V5.1
79*49*32mm
Indicator light description Safety and Maintenance
Indicator light: headset charging, LED breathing lamp.
state full charge stop charging, light off
Definition of headphone breathing lamp:
1S; Power-on pairing: ice green light stays on for 1S;
Low power warning: ice green light flash for 3 times;
Charge: ice green 3S breathe. once;
Backtrack: ice green light flash for 5 times;
Listen to music: ice green light 5S breathe once;
Call: ice green light 5S flash once;
TWS connection: ice green light flash;-
After successful TWS connection: the main ear enters the
ice green light flash, the secondary ear ice green light 5S
breathe once.
Output voltage
5V/1.0A
About 4~5 hours
Language switching:
Close the cabin cover, After the headphone is paired successfully.
Take the earphone out of the cabin cover. Unconnected, triple-click
the touch button area.
Turn off the breathing lamp：
In connection, triple light/off, you can turn
on the breathing lamp again in triple light.
Restore factory Settings:
Press and hold the touch key area for
8 seconds. (L / R)
Phone pairing:
Long press the POWER button for 3 seconds and double click to
automatically enter device pairing. If the phone is not paired within 3
minutes, it will- be turned off.
300 hours
10 m
G16C
HFP1.5,A2DP1.0,AVRCP1.5,SPP1.2
Overview
The silicone cap
Engine room cover
parameter
Product name
Bluetooth
version
Single earbud
battery capacity
The weight of
bare earbuds
108 g
Standby time Working time
Size
Charging case
battery capacity
Signal range
Bluetooth protocol
When using earphones while driving, please obey
the country of destinationAnd area requirements,
please send all equipment and accessories,Keep
out of reach of children's pets and swallow by
mistakeParts may lead to suffocation and serious
consequences do not putThe equipment is placed
too high or too low (0 ℃Below or above 45
degrees Celsius) environment, extremeThe
temperature will cause the equipment to
deform and lower the equipmentCharging
capacity, reduce short service life.Do not wet
the equipment, the liquid will cause the
e q u i p m e n t B a d l y d a m a g e d .
Do not operate the equipment by wet
handsEquipment damage caused by water is
not covered by warrantyIf you listen at a high
volume for a long time, it mightDamage your
h e a ri n g , s ug ge s t u s in g v o i ce a nd
listeningMinimum volume.