Users Manual Part 1

1 Safety Information
Operator’s Manual 1 - 9
WARNING
• The fuse used in the instrument is not a replaceable one. If there is any problem with the
fuse, contact Customer Service Department or your local distributor.
• Any serious incident that has occurred in relation to the device shall be reported to the
manufacturer and the competent authority of the country in which the user and/or the
animal is established.
CAUTION
• Be sure to operate the instrument under the situation specified in this manual. If the
instrument is used in a manner not specified by the manufacturer, the protection
provided by the instrument may be impaired.
• Be sure to use the specified external devices only, and keep them away from water.
• External devices connected to the analyzer and digital interfaces must be authorized and
complied with relevant safety and EMC standards (e.g. IEC 62368-1 Safety of
Information Technology instrument Standard and CISPR 32 EMC of Information
Technology instrument Standard (Class B)). Any persons who connects additional
instrument to the signal input or output ports and configures a system, is responsible for
ensuring that the system works normally and complies within the safety and EMC
requirements. If you have any questions, consult the technical service department of your
local representative.
• Make sure all the safety measurements are adopted. It is prohibited to disable any safety
device or sensor.
• Keep your clothes, hairs and hands away from the moving parts to avoid injury.
• Be sure to use the instrument under specified environment in this manual. If not, the
instrument may not work properly, the measurement may be unreliable, thus causing
damage to the instrument and harm to the body.
• This instrument is intended to be used by clinical laboratory professionals trained by
Mindray Animal Medical or Mindray Animal Medical-authorized distributors.
• When power cut occurs suddenly, turn off the instrument immediately.
• The instrument must be within the calibration validity period; otherwise, the
measurement results may be inaccurate.
1.2.2 Analyzer Transportation and Installation-related Safety
Messages
WARNING
• When installing the instrument, ensure that the power switch is in close proximity to the
instrument and within your easy access.
• Before turning on the instrument, make sure the input voltage meets the requirements.
CAUTION
• Unpacking, installation or transportation by personnel not authorized or trained by
Mindray Animal Medical may cause personal injury or damage your instrument. Do not
unpack, transport or install your instrument without the presence of Mindray Animal
Medical-authorized personnel.