Users Manual Part 1

6 Customizing the Analyzer Software
Operator’s Manual 6 - 3
Follow below instructions:
1. Tap “Menu > Setup > System Setup > Print Setup” to enter the “Print Setup” screen.
2. Tap the “Print Setup”, “Printing Content”, and “Auto print after sample analysis” tabs as
needed to perform print settings as needed.
See below for setting descriptions
Item Description
Print
device
Select a print device on the network from
the pull-down list:
For questions about the print device
and print drive settings, contact the
customer service personnel of your
print device supplier. (administrators)
Printer
driver
Select a proper print drive from the pull-
down list:
• Auto Identification
• PCL6
• Raster print
Paper Select the desired paper type from the pull-
down list:
The analyzer supports the following paper
types:
• A4
/
Blood
Sample
Report
Title
Enter the desired title in the edit box.
The report titles set up here will display on
the printed analysis reports.
/
Blood
Sample
Report
Template
Select the desired template format from the
pull-down list:
• One page with graph
• One page without graph
When “One page with graph” is
selected, the print results include the
parameter results and graphs.
When “One page without graph” is
selected, the print results include only
the parameter results.
Para.
Language
Select a parameter language from the pull-
down list:
• English abbreviation
When “English abbreviation” is
selected, the printed report displays
the English parameter names.
Copies Enter the number of report copies to be
printed when you tap “Print”.
The default value is 1 copy, and the setting
range is [1 to 20].
/
Printing
Content
Check the options you want to display on
the printed report:
• Print flags of edited result
• Print high/low result flags
• Print suspect flags
• Print flags
• Print reference range
• Monochrome Print
For the description of setting up high/
low results as well as suspect results
flags, see “6.3.3 Auxiliary Setup” for
other settings
For the description of setting up
reference ranges, see “6.3.4 Para.
Setup (Administrators)”