Users Manual Part 1

6 - 10 Operator’s Manual
6 Customizing the Analyzer Software
Follow below instructions:
Microscopic parameters setup (administrators)
In the default mode, the “Microsco. Para. Setup” screen displays microscopic parameters of
hematology analysis.
Administrators may add new parameters, edit or delete existing microscopic parameters on the
“Microscopic Para. Setup” screen.
1. Tap “Menu > Setup > Para. Setup > Microsco. Para. Setup” to enter the “Microsco. Para.
Setup” screen.
2. Add new microscopic parameters, or edit or delete existing microscopic parameters as needed.
Follow below instructions:
Item Description
New Tap “New” to add a new reference
group.
On the new reference group setup
screen, set up the name, lower and
upper limits of ages, as well as the
gender information for the new
“Reference group”.
When necessary, tap and edit the
“Upper” and “Lower” limits for the
parameters.
/
Edit Tap to select the reference group to edit,
and tap “Edit”.
For the factory reference groups, can
edit the “Upper” and “Lower” limits
of the parameters.
For the custom reference groups, you
can edit the “Upper” and “Lower”
limits of the parameters, and rename
the custom reference group.
Delete Tap to select the custom reference
group to delete, and tap “Delete”.
You cannot delete factory reference
groups.
Default Tap and select a reference group, and
tap “Default” to set the selected
reference group as default reference
group.
/
Item Description
Add a new
microscopic
parameter
Tap “New” to add a row in the microscopic parameter name area. Enter the
new parameter name in the “Microscopic Parameter Name” column.
Edit the microscopic
parameters
Tap a parameter name in the table to edit the name.
Delete the
microscopic
parameters
Select a row in the table, and tap the “Delete” button to delete the
parameter.