Users Manual Part 1

8 Reviewing Sample Results
Operator’s Manual 8 - 7
8.2.6 Exporting Sample Results
Users of administrator level can export the sample records, graphic data, flags, and other
parameters of the selected sample records to a USB flash drive.
Before exporting sample records, make sure that you have inserted a safe USB flash drive into the
USB port on the analyzer.
CAUTION
• The USB port of the analyzer is only used to connect to a designated peripheral device.
For details about supported devices and models, see “B.5 Input/Output Devices.”.
• The user should ensure the data safety of the USB devices connecting to the analyzer.
Exporting some or all sample records
Follow below instructions to export selected or all sample records:
1. Select “Menu > Table Review” or tap the “Table Review” utility button to enter the “Table
Review” screen.
2. Tap to select one or more samples records that you want to export; to export all the sample
records, go to the next step.
3. Tap “Export”.
The “Export” dialog box displays.
4. To export some sample records, tap “Selected records” in the “Export Range” area; to export
all the sample records, tap “All records” in the “Export Range” area.
5. Tap “OK”.
The analyzer exports the corresponding sample records to the USB device.
8.2.7 Calculating CV Values
Follow bellow instructions to calculate the CV values of sample results:
1. Select “Menu > Table Review” or tap the “Table Review” utility button to enter the “Table
Review” screen.
2. Tap to select multiple sample records for which you want to calculate the CV values.
3. Tap “CV”.
The screen displays the Mean value, SD value and the CV value for each parameter.
NOTE:
To calculate CV values, select at least 3 samples.
8.2.8 Editing Information
1. Select “Menu > Table Review” or tap the “Table Review” utility button to enter the “Table
Review” screen.
2. Tap to select the sample records of which you want to edit the sample information.
The selected sample record is highlighted.
3. Edit the sample information.