Users Manual Part 2

Operator’s Manual 11 - 1
11 Printing
You can set up the print templates for sample results report, graphs, QC results, QC graphs, manual
calibration factors etc., and print them using the print templates.
11.1 Setting up Print Template
For information about print setup, see “6.3.1 System Setup”.
11.2 Printing Sample Result Report
NOTE:
The analyzer prints at most 700 records at one time.
Before printing a sample test report, confirm the following items:
• The printer has been set and connected correctly.
• There are enough paper in the printer.
11.2.1 Printing Current Sample Result Report
When a cycle of sample analysis finishes, tap the “Print” button on the “Count” screen.
The analyzer automatically prints the results of the current sample according to the print setup.
11.2.2 Printing from the Table Review Screen
Follow below instructions:
1. Tap “Menu > Table Review” or tap “Table Review” button to enter the “Table Review”
screen.
2. (Optional) Tap to select one or more sample records to be printed on the test result report.
If you are going to print all sample records, skip this step.
3. Tap “Print” in the utility button area.
A dialog box for printing displays.