Users Manual Part 2

11 Printing
Operator’s Manual 11 - 3
1. Tap “Menu > Table Review” or tap “Table Review” button to enter the “Table Review”
screen.
2. Select one or more sample records of which you want to review the microscopic parameters.
The selected sample record is highlighted.
3. Tap “Graph” to enter the “Graph” screen.
4. Tap “Other Para. > Microscopic Para.” to enter the “Microscopic Para.” screen.
Tap “Print” button to print the microscopic parameter results.
11.3 Printing QC Result Report
Before printing a QC test result report, confirm the following items:
• The printer has been set up and connected correctly.
• There is enough paper in the printer.
• To print the QC results, confirm that there are results in the QC file.
11.3.1 Printing QC Results in Specified QC Files
Follow below instructions:
1. Tap “Menu > QC > Setup” to enter the QC file setup screen.
2. Select the desired QC file.
3. Tap “QC Table” to enter the QC table screen of the selected QC file.
4. Tap “Print” in the utility button area.
The analyzer prints all the QC test results under the specified QC file.
NOTE:
When the QC test results are printed from the QC table screen, the printed report does not include
QC graph.
11.3.2 Printing QC Graphs in Specified QC Graph
Follow below instructions:
1. Tap “Menu > QC > Setup” in turn to enter the QC file setup screen.
2. Select the desired QC file.
3. Tap “QC Graph” to enter the QC graph review screen of the selected QC file.
4. Tap “Print” in the utility button area.
The analyzer prints the QC graph in the specified QC file.
11.4 Printing Manual Calibration Factors
Before printing manual calibration factors, confirm the following items:
• The printer has been set up and connected correctly.
• There is enough paper in the printer.