Users Manual Part 2

12 Service
Operator’s Manual 12 - 7
4. Press the [Aspirate] key to start probe cleanser maintenance.
The analyzer aspirates probe cleanser.
5. Remove the probe cleanser.
The analyzer automatically completes probe cleanser maintenance.
12.5 Auto-cleaning of the Parts and Components
You should clean the following parts or components when:
Follow below instructions:
1. Tap “Menu > Service > Maintenance > Cleaning” to enter the “Cleaning” screen.
2. Tap the corresponding cleaning program.
The analyzer automatically completes the operation.
12.5.1 Cleaning the Probe Wipe and Blood Barrier Bracket
CAUTION
Before cleaning the probe wipe, make sure the analyzer is shut down and the power supply is
turned off.
Follow the following instructions:
1. Open the front cover of the analyzer
Hold the bottom of the front cover with both hands and open the front cover upward until it
stands on the top cover.