Users Manual Part 2

Operator’s Manual 13 - 1
13 Troubleshooting
13.1 Overview
This chapter contains information that is helpful in locating and correcting problems that may occur
during operation of your analyzer.
NOTE:
This chapter is not a complete service manual and is limited to problems that are readily diagnosed
and/or corrected by the user of the analyzer.
13.2 Checking Analyzer Status
You can check analyzer information from the “Status” menu, including statistics, temperature and
pressure, floater status, sensor status, voltage and current, as well as version information. Checking
the status information on the “Status” screen is significant for you to locate and remove errors of
the analyzer.
Follow the path below to review analyzer status:
Item/Software
Access
Status Path Access Level
Requirement
Statistics Valid Runs Menu > Status > Statistics All
Runs since latest
initialization
Sample Runs
QC Runs
Calibration Runs
Valid Sample Runs
Valid Runs After Latest
Startup
Runs after Probe
Cleanser Maintain
Clogs in Impedance
Channel
Background Runs