Users Manual Part 2

13 - 12 Operator’s Manual
13 Troubleshooting
0x10107 SCI priming out of
time
SCI priming out of
time
Follow below instructions:
1. Tap the “Remove Error” button to
remove this error;
2. If the error still exists, contact our
customer service department.
0x99805 Background
abnormal
Background
abnormal
Follow below instructions:
1. Tap the “Remove Error” button to
remove this error;
2. If the error still exists, contact our
customer service department.
0x10306 Fluidic system
status abnormal
Sampling probe
clogged
Follow below instructions:
1. Tap the “Remove Error” button to
remove this error;
2. If the error still exists, contact our
customer service department.
0x10307 Fluidic system
status abnormal
Flow cell clogged Follow below instructions:
1. Tap the “Remove Error” button to
remove this error;
2. If the error still exists, contact our
customer service department.
0x99801 Exiting standby
status failed
Exiting standby
status failed
Follow below instructions:
1. Tap the “Remove Error” button to
remove this error;
2. If the error still exists, contact our
customer service department.
0x99802 Exiting standby
status failed
Exiting standby
status failed
Follow below instructions:
1. Tap the “Remove Error” button to
remove this error;
2. If the error still exists, contact our
customer service department.
0x99803 Auto startup failed Auto startup failed Follow below instructions:
1. Tap the “Remove Error” button to
remove this error;
2. If the error still exists, contact our
customer service department.
0x10111 SCI priming failed SCI syringe is busy Follow below instructions:
1. Tap the “Remove Error” button to
remove this error;
2. If the error still exists, contact our
customer service department.
Error ID Error Message Description Solution