Users Manual Part 2

13 - 14 Operator’s Manual
13 Troubleshooting
0x10303 SCI bath pressure
release abnormal
SCI bath pressure
release abnormal
Follow below instructions:
1. Tap the “Remove Error” button to
remove this error;
2. If the error still exists, contact our
customer service department.
0x10305 WC2 bath pressure
release abnormal
WC2 bath pressure
release abnormal
Follow below instructions:
1. Tap the “Remove Error” button to
remove this error;
2. If the error still exists, contact our
customer service department.
0x30000 Reaction bath
temperature high
Reaction bath
temperature high
Follow below instructions:
1. Click “Remove Error”button and
recheck the temperature?
2. If the error still exists, contact our
customer service department.
0x30001 Preheating bath
temperature control
abnormal
Preheating bath
temperature out of
the upper limit for
counting
Follow below instructions:
1. Tap the “Remove Error” button to
remove this error;
2. If the error still exists, contact our
customer service department.
0x30005 Ambient
temperature is high
Ambient
temperature is high
Follow below instructions:
1. Make sure the ambient temperature
is within acceptable range.
2. Tap the “Remove Error” button to
re-test the temperature.
3. If the error still exists, contact our
customer service department.
0x30002 Temperature inside
analyzer out of
range
Temperature inside
analyzer out of
range
Follow below instructions:
1. Make sure the analyzer is placed in a
place with good ventilation, heat
dispersion and with no direct
sunlight.
2. Tap the “Remove Error” button to re-
test the temperature.
3. If the error still exists, contact our
customer service department.
0x30003 Reaction bath
temperature low
Reaction bath
temperature low
Follow below instructions:
1. Click “Remove Error” button and
recheck the temperature?
2. If the error still exists, contact our
customer service department.
Error ID Error Message Description Solution