Users Manual Part 2

13 Troubleshooting
Operator’s Manual 13 - 15
0x30004 Preheating bath
temperature control
abnormal
Preheating bath
temperature out of
the lower limit for
counting
Follow below instructions:
1. Tap the “Remove Error” button to
remove this error;
2. If the error still exists, contact our
customer service department.
0x30006 Ambient
temperature low
Ambient
temperature low
Follow below instructions:
1. Make sure the ambient temperature
is within acceptable range.
2. Tap the “Remove Error” button to re-
test the temperature.
3. If the error still exists, contact our
customer service department.
0x30007 Ambient
temperature is high
Ambient
temperature is high
Follow below instructions:
1. Make sure the ambient temperature
is within acceptable range.
2. Tap the “Remove Error” button to re-
test the temperature.
3. If the error still exists, contact our
customer service department.
0x30008 Ambient
temperature low
Ambient
temperature low
Follow below instructions:
1. Make sure the ambient temperature
is within acceptable range.
2. Tap the “Remove Error” button to re-
test the temperature.
3. .If the error still exists, contact our
customer service department.
0x30009 Reaction bath
temperature control
assembly is
damaged
Reaction bath
temperature control
assembly is
damaged
Follow below instructions:
1. Click “Remove Error” button and
recheck the temperature?
2. If the error still exists, contact our
customer service department.
0x30010 Preheating bath
temperature control
abnormal
Preheating bath
does not achieve
target temperature
after startup
procedure
3. Follow below instructions:
4. Tap the “Remove Error” button to
remove this error;
5. If the error still exists, contact our
customer service department.
Error ID Error Message Description Solution