Users Manual Part 2

B Specification

Operator’s Manual B - 5

B.5.5 USB Drive

Supporting the protocol of USB2.0 and above.

B.6 Interfaces

NOTE:

The USB interfaces on the back of the analyzer shall only be used to connect the peripheral devices

specified in this manual. For details about supported devices and models, see “B.5 Input/Output

Devices.”.

• One network port (compatible with 10/100/1000M Ethernet and complying with the 802.3u/

802.3ab standard)

• Four USB ports including three supporting USB2.0 and one supporting USB3.0 (specification:

DC 5V; 500 mA)

B.7 Power Supply

B.8 Fuse

WARNING

The fuse of the analyzer is not replaceable. In case of any questions, contact Customer Service

Department or your local distributor.

B.9 Temperature Protection Switch

Rated voltage: 9V

Rated current: 25A

NOTE:

If the temperature protection switch is damaged, please contact Customer Service Department or

the local distributor. Operators can not replace or repair the temperature protection switch by

themselves.

B.10 EMC Description

Statement and warning:

Volta ge Input power Frequency

Main unit 100V-240V~ (±10%) 300 VA 50 Hz/60 Hz (±1 Hz)