User's Manual
Table Of Contents
- 1 Safety
- 2 General Product Description
- 3 Getting Started
- 3.1 Unpacking and Checking
- 3.2 Environmental Requirements
- 3.3 Connecting the ECG Leadwire
- 3.4 Installing the Batteries
- 3.5 Powering On the Unit
- 3.6 Understanding Touch Gestures
- 3.7 Basic Operations
- 3.7.1 Understanding the Screen Display Orientation
- 3.7.2 Browsing the Screen Display
- 3.7.3 Switching the Screen Display Orientation
- 3.7.4 Flipping the Landscape Display
- 3.7.5 Displaying the Quick Keys Area
- 3.7.6 Entering the Main Menu
- 3.7.7 Turning the Display Off
- 3.7.8 Turning the Display On
- 3.7.9 Unlocking the Screen
- 3.7.10 Acknowledging the Nurse Call
- 3.8 Using the Pouch
- 4 User Configurations
- 5 Patient Management
- 6 Alarms
- 7 Monitoring ECG
- 7.1 Introduction
- 7.2 Safety
- 7.3 Preparation for Monitoring ECG
- 7.4 Changing the ECG Settings
- 7.5 Understanding the ECG Display
- 8 Monitoring SpO2 (Optional)
- 9 Monitoring with the TD60 at the CS
- 9.1 Introduction
- 9.2 Physiological Alarms
- 9.3 ECG Monitoring
- 9.4 QT Monitoring
- 9.5 ST Monitoring
- 9.6 Arrhythmia Monitoring
- 9.7 SpO2 Monitoring
- 10 Configuring the TD60
- 10.1 Introduction
- 10.2 Maintenance Menu
- 10.2.1 Entering the Maintenance menu
- 10.2.2 Configuring the General Menu
- 10.2.3 Configuring the Alarms Menu
- 10.2.4 Quick Keys Menu
- 10.2.5 Configuring the Defaults Menu
- 10.2.6 Transferring a Configuration
- 10.2.7 Screen Lock Menu
- 10.2.8 Changing the Passwords
- 10.2.9 Changing the Device Name
- 10.2.10 Demo Mode
- 10.2.11 Service Menu
- 11 Battery
- 12 Troubleshooting
- 13 Cleaning and Disinfecting
- 14 Maintenance
- 15 Accessories
- A Product Specifications
- B EMC
- D Symbols and Abbreviations
- E Anomaly
Maintenance Menu Configuring the TD60
10 - 8 TMS60 Operator’s Manual
◆ To retry the import from the TD60 unit, tap the external device which is dis-
playing the [Failure] message, tap the [Retry] button to restart the transfer.
You may need to repeat the retry operation several times until the transfer is
successful.
10.2.7 Screen Lock Menu
10.2.7.1 Understanding the Screen Lock Mode
There are two modes of being able to lock the screen to assist in preventing unauthor-
ized use. Each mode allows the user access to certain features of the product without
entering a passcode. When the correct passcode is entered, all features are available.
■ Locked Mode Features:
◆ Main screen and main menu are not accessible without passcode entry.
◆ The message area is still viewable.
◆ Hardkeys are enabled.
■ View Only Features:
◆ Upon powering up, the main screen will be displayed after the new patient
choice is made.
◆ Main Screen is accessible without passcode entry.
◆ The [System Info] menu is accessible by tapping the battery symbol on the
main screen.
◆ The [Lead Placement] menu is accessible by tapping an “ECG Lead Off”
message in the message area.
◆ Ability to change display orientation.
◆ Hardkeys are enabled.
10.2.7.2 Setting the Screen Lock
The initial enabling of screen lock mode requires a passcode to be entered immediately
as follows:
1. In the [Maintenance] menu, tap [Screen Lock] to select a screen lock mode.
2. Enter a new passcode for the screen lock.
After the passcode is entered, the screen exits the passcode setup menu. The
selected lock mode displays to the right of [Screen Lock].