User's Manual
Table Of Contents
- 1 Safety
- 2 General Product Description
- 3 Getting Started
- 3.1 Unpacking and Checking
- 3.2 Environmental Requirements
- 3.3 Connecting the ECG Leadwire
- 3.4 Installing the Batteries
- 3.5 Powering On the Unit
- 3.6 Understanding Touch Gestures
- 3.7 Basic Operations
- 3.7.1 Understanding the Screen Display Orientation
- 3.7.2 Browsing the Screen Display
- 3.7.3 Switching the Screen Display Orientation
- 3.7.4 Flipping the Landscape Display
- 3.7.5 Displaying the Quick Keys Area
- 3.7.6 Entering the Main Menu
- 3.7.7 Turning the Display Off
- 3.7.8 Turning the Display On
- 3.7.9 Unlocking the Screen
- 3.7.10 Acknowledging the Nurse Call
- 3.8 Using the Pouch
- 4 User Configurations
- 5 Patient Management
- 6 Alarms
- 7 Monitoring ECG
- 7.1 Introduction
- 7.2 Safety
- 7.3 Preparation for Monitoring ECG
- 7.4 Changing the ECG Settings
- 7.5 Understanding the ECG Display
- 8 Monitoring SpO2 (Optional)
- 9 Monitoring with the TD60 at the CS
- 9.1 Introduction
- 9.2 Physiological Alarms
- 9.3 ECG Monitoring
- 9.4 QT Monitoring
- 9.5 ST Monitoring
- 9.6 Arrhythmia Monitoring
- 9.7 SpO2 Monitoring
- 10 Configuring the TD60
- 10.1 Introduction
- 10.2 Maintenance Menu
- 10.2.1 Entering the Maintenance menu
- 10.2.2 Configuring the General Menu
- 10.2.3 Configuring the Alarms Menu
- 10.2.4 Quick Keys Menu
- 10.2.5 Configuring the Defaults Menu
- 10.2.6 Transferring a Configuration
- 10.2.7 Screen Lock Menu
- 10.2.8 Changing the Passwords
- 10.2.9 Changing the Device Name
- 10.2.10 Demo Mode
- 10.2.11 Service Menu
- 11 Battery
- 12 Troubleshooting
- 13 Cleaning and Disinfecting
- 14 Maintenance
- 15 Accessories
- A Product Specifications
- B EMC
- D Symbols and Abbreviations
- E Anomaly
Getting Started Installing the Batteries
TMS60 Operator’s Manual 3 - 5
3.4 Installing the Batteries
You can use two AA, three AA batteries or a lithium-ion rechargeable battery pack to run
the TD60. The runtime is dependent on the battery solution you chose. A lithium-ion
battery pack will provide the longest runtime. For details about the recommended AA
batteries, refer to "Miscellaneous" on page 15 - 5.
WARNING
• Insert the ECG lead set into the ECG connector. The following perfor-
mance may be affected by a weak connection:
◆ ECG signal quality
◆ Wireless signal strength
◆ Water resistance
• Do not use the ECG leadwire to move or lift the TD60. This may cause the
device to fall, which may damage the equipment or injure the patient.
NOTE
• ECG leadwires are used as the antenna for the TD60. To ensure good
radio performance, always connect the ECG leadwires to the ECG con-
nector while monitoring the patient.
• Insert the SpO
2
cap in the SpO
2
connector when SpO
2
is not in use.
NOTE
• Always keep the battery compartment dry.
• Never use brute force to install the lithium-ion battery pack or AA bat-
tery tray. Otherwise the waterproof ring surrounding the battery frame
edge may be broken to affect the waterproof performance.