Users Manual

Noise (static,
beeping)
* Battery power may be too low; recharge battery.
* Possible alarm ring alert
*Possible out of signal alert.
Pairing failed
* Make sure that the Adapter is connected to the Camera Unit.
Try pairing to another CAM channel.
Picture is black
and white
* Night vision LED may be ON. Night vision mode operates in black
and white.
*Turn on room lights to force monitor out of night vision mode.
The picture
playback is not
smooth
(choppy video
with low frame
rate)
* Try moving the Camera Unit closer to the Monitor Unit
* Remove obstructions between the Camera and Monitor Unit.
*Use of other 2.4GHz products, such as wireless networks (Wi
routers), Bluetooth systems, or microwave ovens, may cause
interference with this product. Keep Camera and Monitor Unit at
least 5ft (1.5m) away from these items, or turn them o if they
appear to cause interference.
Noise
interference on
your Monitor
Unit
* Volume may be set too high on the Monitor Unit. Lower volume.
* The Camera and Monitor Units may be too close. Move them
further apart.
* The Camera Unit may be too far away and out of range. Move the
Camera Unit closer to the Monitor Unit.
*Make sure the Camera and Monitor Units are placed away from
other electrical equipment, such as a television, computer or
cordless/mobile telephone.
The
battery will not
charge
* The Adapter may not be properly connected
*Try using the other Adapter included.
Video not clear
with stagnant
spots/malks on
the screen
*Make sure there is no dirty on lens
Mod el: SM650