Product Info

Product does
not switch on
*Conrm that the Camera and Monitor Unit are ON(check power LED
indicator).
*Conrm that Power adapters are properly connected.
Reception
Interference
(static)
*The camera and Monitor Unit may be too far apart.
*The battery power may be too low.
*Other electronic devices may be interfering with the signal.
*The Camera or Monitor Unit may be in close proximity to large metallic
objects causing interference.
* Use of other 2.4GHz products, such as wireless networks (Wi routers),
Bluetooth systems, or microwave ovens, may cause interference with
this product. Keep Camera and Monitor Unit at least 5ft (1.5m) away from
these items, or turn them o if they appear to cause interference.
Camera Unit
loses link with
the Monitor
Unit
* If the Camera Unit is too far away with low reception, move the
Camera Unit closer to the Monitor Unit.
* Reset both units by disconnecting them from battery and
electrical power. Wait about 15 seconds, then reconnect.
* Large metallic objects, including doors, refrigerators, mirrors,
ling cabinets, and also reinforced concrete, may block the radio
signal if between the Camera and Monitor Unit.
* The signal strength may be reduced when in close proximity to
radio or electrical equipment, such as TVs, computers, cordless or
mobile phones, uorescent lights or dimmer switches.
* Use of other 2.4GHz products, such as wireless networks (Wi
routers),Bluetooth systems, or microwave ovens, may cause
interference with this product. Keep Camera and Monitor Unit at
least 5ft (1.5m) away from these items, or turn them o if they
appear to cause interference.
* Pair the Camera Unit under a dierent channel. (chapter 4.1)
No picture from
a Camera Unit
* Check all connections to the camera. Conrm that the adapter is
plugged in.
* Make sure that the Camera Unit is within range of the monitor.
* Conrm that the Camera and Monitor Unit are paired.
No sound from
Monitor Unit
* Volume setting may be too low. Adjust to a higher setting.
[e-mail]