Users Manual

Q1. Why the camera can't be paired with the monitor?
*the camera is properly connected to the power supply, try to replace the
charging cable and charger and try again.
*Make sure the camera and the monitor are within the eective transmission
distance.
*Press the reset key at the back of Parent unit and try to pair them again
Q2. Why are the camera and display always disconnecting?
*The camera or monitor may be placed too close to many metal objects.
*Other electronic devices may be interfering with the signal.
*The battery power may be too low.
*Restart Baby unit and Parent unit.
*Press the reset key at the back of Parent unit.
Q3.Why is there a harsh noise coming from the device?
*The camera and monitor may be too close together.
*The volume on the monitor may be set too high.
*Press the reset key at the back of Parent unit.
Q4. Why I can't hear the baby on the parent unit?
*Turn up the monitor volume.
*Turn on Sound Alarm on the monitor, then speak loudly near the camera,
and check whether the sound detection indicator in the lower right corner
will light up.