Instruction Manual

Instruction Manual

Model: BT-001

Bluetooth Transmitter

INSTALLATION

Installing the Bluetooth Transmitter

1. Plug the included USB Wall Adapter into a standard ac outlet. Connect the USB end of

the cable to the USB port of the Wall Adapter and the Micro USB end of the cable to the

DC 5V IN of the Bluetooth Transmitter. Red LED on the Bluetooth Transmitter will flash

slowly.

2. Connect the audio output of the source device (TV, DVD player, etc) to the AUX IN of

Bluetooth Transmitter with the included 3.5mm Aux cable or RCA cable.

3. Press and hold the Power ON/OFF button for 3 seconds to turn on the Bluetooth

Transmitter, Blue and Green LED lights will flash alternatively (besides the Red solid LED

light).

Connecting the Bluetooth Headphone to the Bluetooth Transmitter

1. Press and hold the Power ON/OFF button for 3-4 seconds to turn on the Bluetooth

Headphone, indication tone would be heard and the LED will flash red and blue

alternatingly.

2. Place the Headphone and Transmitter so that they are no further than 1 foot apart.

3. Short press the Search button of the Transmitter once to start searching and matching.

4. If connection is successful, another indication tone would be heard and the LED on the

Headphone will flash Blue slowly. And Green LED light on the Transmitter will stay on

(besides the Red solid LED light).

5. You can enjoy the audio output of device (TV, DVD player, etc) through the Headphone.

6. Press and hold the Volume Decrease or Volume Increase button to decrease or increase

the volume.

Bluetooth Transmitter:

1. Power source: DC 5V

2. Transmitting distance: 33 feet

FCC STATEMENT :

This device complies with Part 15 of the FCC Rules. Operation is subject to the

PAGE 1
Instruction Manual Model: BT-001 Bluetooth Transmitter INSTALLATION Installing the Bluetooth Transmitter 1. Plug the included USB Wall Adapter into a standard ac outlet. Connect the USB end of the cable to the USB port of the Wall Adapter and the Micro USB end of the cable to the DC 5V IN of the Bluetooth Transmitter. Red LED on the Bluetooth Transmitter will flash slowly. 2. Connect the audio output of the source device (TV, DVD player, etc) to the AUX IN of Bluetooth Transmitter with the included 3.
PAGE 2
following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation. Warning: Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.