Instruction Manual

1.
•
•
•
2.
•
•
•
3.
•
•
•
**
MADE IN CHINA
INSTRUCTIONS:
Charging the PowerBank:
Charge the powerbank fully before usage.
Connect the provided Type-C to Type-C
cable to a power source and to Type-C
input port on the powerbank(5).
Once connected the Digital Battery
and stop blinking once fully charged.
Charging Electronic Devices with the
Power Bank, like some laptops:
Connect the appropriate cable to your
mobile phone/device then connect the
other end of the cable into the Type-C
output port(5) or USB A output port(6).
Digital Battery Indicator(2) will illuminate
when charging.
Remove the cable from your mobile device
and powerbank once fully charged.
Charging Electronic Devices with the
Wireless Charging:
Press the Powerbank ON/OFF(3) to turn
on the wireless charging function.
Digital Battery Indicator(2) will illuminate
once the powerbank is in wireless
charging standby mode.
Place the wireless charging supported
mobile device on the charging surface(1),
Digital Battery Indicator( 5) will illuminate
when device is charging.
Remove the mobile device and powerbank
once fully charged.
"188" ,an unkown object being detected
Vent 20000 mAh
USB-C PD Fast
Wireless Power Bank
Instruction Manual
7121-74
1 x 20000mAh PD Wireless Power Bank
1 x Instruction Manual
1 x Type-C to Type-C Cable
Capacity: 20000mAh/3.7V/74Wh
Micro-USB Input: DC 5V/2.4A 3A(Max)
Type-C Input: DC 5V/2.4A 3A(Max) 9V/2A
Type-C Output: DC 5V/3A 9V/2A 12V/1.5A
USB A Output: DC 5V/3A 9V/2A 12V/1.5A
Total Output: 18W (Max)
Wireless Output: 5W/7.5W/10W
between the wireless charging area and
the phone
by FOD(Foreign Object Detection).
(Indicator will flash
PD means power delivery.
10 seconds, then light off)
ON/OFF Button(3): Press once to view the
remaining power capacity on Digital Battery
Indicator(2).
1.
2.
3.
4.
5.
6.
•
•
•
•
•
•
•
•
Wireless Charging Output Surface
Digital Battery Indicator
ON/OFF Button
Micro-USB Input Port
Type-C Input/Output Port
USB Output
What’s included:
Features:
LED Indicators
This device complies with Part 15 of the
FCC Rules. Operation is subject to the
following two conditions:
This device may not cause harmful
interference, and
This device must accept any interference
received, including interference that may
cause undesired operation.
Warning:
approved by the party responsible for
compliance could void the user’s authority
to operate the equipment.
(1)
(2)
*
FCC Statement:
To ensure product safety, ensure that
identical replacement parts.
Attachments on the back of your phone can
impede the effectiveness of the wireless
charger, and lead to overheating. Please
remove attachments from the phone before
charging on this device.
12.
13.
WARNING-When using this product, basic
precautions should always be followed:
Read all the instructions before use.
Never store or use this product in
temperatures below 32°F (0°C) or above
115°F (45°C).
Do not overcharge your phone. The
unit may become hot under excessive
use. Remove your phone once it is fully
charged. Never charge your phone for
more than 7 hours at a time.
The unit will only achieve full performance
after 2 or 3 completed charge and
discharge cycles.
To reduce the risk of injury, close
supervision is required when the product is
used near children.
Do not expose the device to moisture.
Do not use the device in excess of its
output rating. Overload outputs above the
Do not use the device if damaged or
explosion or risk of injury.
Do not disassemble the device. For
professional. Incorrect reassembly may
or temperatures above 104°F (40°C) may
result in explosion.
•
1.
2.
3.
4.
5.
6.
7.
8.
9.
10.
11.
SAFETY PRECAUTIONS: