User's Manual

Usage Guidelines for FCC Compliance
Antenna
In order to maintain compliance with FCC regulations,This module has been tested with the
following antennas:
nix Part Number Antenna Type Antenna Gain DTS
Part Number
Antenna Type
Antenna Gain
ANT-2400-01A
PCB
1.3 dBi
Module Modification
The module must not be physically altered in any way. If any connections are made to the
module that bypass the module pins, socket, or antenna connector, the FCC modular
certification cannot be inherited.
End Product Labeling Requirements
Pursuant to FCC public notice DA 00-1407, the end product must be labeled on its exterior
with the following verbiage:
“Contains FCC ID: ZBXMT-WN713NM”
Additional FCC Testing Requirements
While the module’s FCC certification can be inherited (presuming the guidelines are met),
additional testing will be required to achieve full FCC compliance for your end-product. The
integrator is required to perform unintentional radiator testing on the final product per FCC
sections 15.107 and 15.109.
Additional, product-specific testing might be required. Please contact the FCC regarding
regulatory requirements for your application.
RF exposure compliance
The Module should be install on fixed host. Restriction for mobile host.