User's Manual

2. Application model
Wireless access point AP Mode
Will end the network cable to ＷＴＯ－ＷＡ７１８Ｎ－Ａ １the network port, connected to a switch
or router at the other end; WTO-WA718N-A1 as a complement to wired local area network,
implementation of wired LAN wireless access.
As long as connected to the power supply, insert and attach the network cable,
and then connect the computer wirelessly after simple settings WTO-WA718N-A1 to the
Internet. WLAN green led is lit, data transfer and shining; POWER green led is
lit; LAN green led is lit, data transfer and shining. AP and the computer's IP
address and DNS address required under the front of the required settings for the
wireless router address.
Application environment: applies to the temporary need for wireless devices to
a wired network environment, such as bars, hotels, schools hostels.
3. PC Connection settings ( in front of the set, make sure that your computers
installed the wireless card )
1) ． WTO-WA718N-A1 connected to the power supply, network cable from the router
associated, convert for wired network to a wireless network, is to front-end access
to gateway 192.168.8.1 wired router (open this router DHCP function) connection
settings, for example description :
2). Found in the wireless networks list name “WR-11n” AP device; Double-click
follow the on-screen instructions to establish a connection;
UnRegistered