User's Manual
Table Of Contents
- MTO-WA718N-A1 AP
- Quick Installation Guide
- VER ： 1.0
- Set your computer's IP 192.168.0.X network segment; (X is 1-253 integer between and not 60)
- With a network cable to connect the computer's Ethernet port and network interface module;
- Then the computer's command prompt window, enter ping command; has the following screen is connected properly;
- In the computer's browser address bar enter 192.168.0.60; enters the AP management interface;
- Note: It is a user-specified functions of the software; The AP default mode is Bridge, Wireless mode is Client; User name and password is admin;
- In this position, the IP address of the LAN can be modified;
- In this position you can modify parameters related to wireless;
- In this position, you can set the wireless encryption;
2. AP management interface
a. Set your computer's IP 192.168.0.X network segment; (X is 1-253 integer
between and not 60)
b. With a network cable to connect the computer's Ethernet port and network
interface module;
c. Then the computer's command prompt window, enter ping command; has the
following screen is connected properly;
d. In the computer's browser address bar enter 192.168.0.60; enters the AP
management interface;
Note: It is a user-specified functions of the software; The AP default mode is
Bridge, Wireless mode is Client; User name and password is admin;