50M Wireless USB Adaptor User Manual to connect the wireless network. Click 3.2.2. Add to profile Select a wireless network and click the “red” button to create this profile (the following picture). Input the profile name and select Network Type, you should select “Infrastructure-connection to AP”, then click .
150M Wireless USB Adaptor User Manual If it is encrypted, you need to enter Network Key to confirm it and then click next.(Note: profile will detect the Authentication and Encryption of current wireless network, you don‟t need to change it .) . You can select “Use Pre-logon Connection” and click The wireless network connection be added to the profile list.
150M Wireless USB Adaptor User Manual 3.2.3. Profile Management Select a profile and you can delete, edit and export to computer as a Wireless profile file. Also you can click the “Red” button to display the Profile list. Select a profile and click the “red” button to save the current profile as a profile to your computer. Give the saved profile file a name and click save.
150M Wireless USB Adaptor User Manual 3.2.4. Wi-Fi protect setup Wi-Fi Protect Setup (WPS) function can let you create a safety network easily. You can through PIN Input Config (PIN) ‟or ‟Push Button (PBC)‟to encrypt your network. You only need to push the WPS button in the router which support WPS function and click the functions in this adapter, then the router will be encrypted to WPA2-AES mode automatically.
150M Wireless USB Adaptor User Manual Click “Start PBC” and click the WPS button of your wireless router at the same time, Please wait a moment, the connection between the adapter and the router will be established automatically. Method 2: PIN Select “PIN” in WPS Method then click next. Select the appropriate configuration mode, and you will get a number in PIN Code, then click next.
150M Wireless USB Adaptor User Manual Click “Start PIN” button, then Input the PIN code of the adapter’s WPS page into the router’s WPS configure page, then click “connect”, please wait a moment, the connection between the adapter and the router will be established automatically. 3.2.5. Available Network The Available Network tab, displays a list of infrastructure and ad-hoc networks available for connection.
150M Wireless USB Adaptor User Manual The section of the window displays the Available Networks. Double-click the network to which you wish to connect. 3.3. Link Information Click the “Red” button to show the link information. The Status tab displays the detailed information of current device and wireless connection.
150M Wireless USB Adaptor User Manual Click to empty the statistics. 3.4. Advanced Click “Red” button to change the advanced configuration. Here you can change “Wireless Mode” and select your country’s region code.
150M Wireless USB Adaptor User Manual Here you can install certif icate, including “User certificate” and “Issuer certificate”. Click select certificate file, and click button to install.
150M Wireless USB Adaptor User Manual 4. Troubleshooting This chapter provides solutions to problems that may occur during the installation and operation of the USB Wireless Adapter. Read the descriptions below to solve your problems. 1. The USB Wireless Adapter does not work properly? Reinsert the USB Wireless Adapter into your PC’s USB slot. Right click My Computer and select Properties. Select the device manager and click on the Network Adapter. You will find the Adapter if it is installed successfully.
