50M Wireless-N USB Adaptor User Manual REV: V1.
Certification FCC CE FCC Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
Content 1. Introduction ......................................................................................... 1 1.1. Product Overview ................................................................................................................................... 1 1.2. Main Features ......................................................................................................................................... 1 1.3. Standards .................................................................
150M Wireless USB Adaptor User Manual 1. Introduction 1.1. Product Overview This USB Wireless adapter is a powerful USB 2.0 Adapter that installs quickly and easily with PCs. The Adapter can be used in ad hoc mode to connect directly with other wireless adapters for peer-to-peer file sharing, or in infrastructure mode to connect with a wireless access point or router. The adapter connects with 802.11n networks at up to 150Mbps, and is backwards compatible with 54Mbps 802.11g or 11Mbps 802.11b devices.
150M Wireless USB Adaptor User Manual 1.5. System Requirements ► Available USB 1.1 or USB 2.0 slot ► 300 MHz processor and 32 MB of memory ► CD-ROM drive ► An 802.11b/g/n access point (for Infrastructure Mode) or another 802.11b/g/n wireless adapter (for Ad Hoc; Peer-to-Peer networking mode.
150M Wireless USB Adaptor User Manual 2. Hardware and Driver Installation 2.1. Insert the Adapter Plug the USB Wireless Adapter into an available USB port on your computer, and the Found New Hardware Wizard (windows 7) screen will appear; Close the wizard, then clicks the following steps to install; 2.2. Driver and Software Installation Turn on the computer and insert the included CD in the CD-ROM drive. Click the Start button and choose Run and enter D:\drivers\windows\setup.
150M Wireless USB Adaptor User Manual Select “Ralink Conf iguration Tool” and Click Install; Click “Install”; 4
150M Wireless USB Adaptor User Manual Click “Finish” to finish the driver installation; 5
150M Wireless USB Adaptor User Manual 3. System configuration The USB Wireless Adapter provides two modes: Station mode and Access Point mode, the default is Station mode. You can select remote wireless AP to connect to Internet in station mode. But in the AP mode, the wireless USB adapter act as a wireless access point which wireless client can connect to share an Internet connection with others.
150M Wireless USB Adaptor User Manual Select Available Network tab and click Refresh button to refresh current available wireless network, you can double click it after highlighting a wireless network you want to connect, If it is encrypted, you need to enter Network Key and confirm it and it will be OK.(Note: profile will detect the Authentication and Encryption of current wireless network, you don‟t need to change it.) Click to enter the encryption code.
