User's Manual

Appendix A: FAQ

1. How do I configure the router to access Internet by ADSL users?

1) First, configure the ADSL Modem configured in RFC1483 bridge model.

2) Connect the Ethernet cable from your ADSL Modem to the WAN port on the router. The

telephone cord plugs into the Line port of the ADSL Modem.

3) Login to the router, click the “Tcp/IP setting” menu on the left of your browser, and click

"WAN Interface" submenu. On the WAN Interface page, select “PPPoE” for WAN

Connection Type. Type user name in the “User Name” field and password in the

“Password” field, finish by clicking “Apply Changes”.

2. How do I configure the router to access Internet by Ethernet users?

1) Login to the router, click the “Tcp/IP setting” menu on the left of your browser, and click

"WAN Interface" submenu. . On the WAN Interface page, select “Dynamic IP” for "WAN

Connection Type", finish by clicking “Apply Changes”.

2) Some ISPs require that you register the MAC Address of your adapter, which is

connected to your cable/DSL Modem during installation. If your ISP requires MAC register,

click "MAC Clone" submenu link. On the "MAC Clone" page, if your PC’s MAC address is

proper MAC address, click the "Clone MAC Address" button and your PC’s MAC address

will fill in the "WAN MAC Address" field. Or else, type the MAC Address into the "WAN

MAC Address" field. The format for the MAC Address is XX-XX-XX-XX-XX-XX. Then click

the "Apply Changes" button. It will take effect after rebooting.

3. The wireless stations cannot connect to the router.

1) Make sure that the wireless stations' SSID accord with the router's SSID.

2) Make sure the wireless stations have right KEY for encryption when the router is

encrypted.

3) If the wireless connection is ready, but you can’t access the router, check the IP

Address of your wireless stations.