User's Manual

6
Click the "cancle" button to cancle the setting.
Click the "Back" button to return to top-level directory.
Click the "Next" button to get into the next-level directory.
1.3 LAN Interface Setup
You can configure the parameters for local area network which connects to the LAN
port of your Access Point.Here you may change the setting for IP address,subnet
mask,DHCP,etc.
IP Address - Enter the IP address of your router in dotted-decimal notation (factory
default: 192.168.1.1).
Subnet Mask - An address code that determines the size of the network. Normally use
255.255.255.0 as the subnet mask.
Click the "cancle" button to cancle the setting.
Click the "Back" button to return to top-level directory.
Click the "Next" button to get into the next-level directory.
Note: If you change the IP Address of LAN, you must use the new IP Address to login
the router.