User's Manual

9
Click the "Next" button to get into the next-level directory.
Click the "Finished" button to enable configuration to take effect.
2. Operation Mode
As the following screenshots ,you can setup different modes to LAN and WLAN
interface for NAT and bridging function.
Gateway: In this mode,the device is supposed to connect to internet via ADSL/Cable
Modem.The NAT is enabled and PCs in LAN ports share the same IP to ISP through
WAN port.The connection type can be setup in WAN page by using PPPOE,DHCP
client,PPTP client,L2TP client or static IP.