User's Manual
Table Of Contents
- 1 Product Overview
- 2 Demo Operational instructions
- 2.1 About Demo Software
- 2.2 Demo System Requirements
- 2.3 technical terms
- 2.4 Demonstration software operation
- 3 Packaging and Storage
- 4 Services and Support
User’s Manual
7
2 Demo Operational instructions
2.1 About Demo Software
The Demo software is used to set system parameters and perform write/read operation on Nation RFID
RF-M6004 series reader and ISO compliant transponders
2.2 Demo System Requirements
● Supported Operating Systems
Windows Server 2003; Windows XP Service Pack 2; Windows Vista; Windows 7 ; Windows 10
These systems are 64-bit operating system. The USB driver does not support 64- bit OS for the time being..
● Required Software
Windows Installer 3.0 is required. Windows Installer 3.1 or later is
recommended. IE 5.01 or later is required: for installing the .NET Framework.
● Recommended hardware requirements
CPU: Pentium 4 at 1.7 GHz or above
Memory: min. 512MB
2.3 technical terms
TID: Tag identifier
EPC: Electronic product code
RSSI: Received signal strength indicator
LBT: Listen before Talk
DRM: Dense reader mode
Q: Slot count parameters