User's Manual
Table Of Contents
- 1 Product Overview
- 2 Demo Operational instructions
- 2.1 About Demo Software
- 2.2 Demo System Requirements
- 2.3 technical terms
- 2.4 Demonstration software operation
- 3 Packaging and Storage
- 4 Services and Support
User’s Manual
8
2.4 Demonstration software operation
2.4.1 Connect Reader
All functions can be operated only after successful connection.
2.4.1.1 Serial Communication Connection
Double-click on the icon to start Demo software. Each icon in the
main interface toolbar is gray to indicate that the reader is not connected
yet. In the “Device Connection” option list, select the communication mode
“RS232 Connection”,“Param”select “COM?” (Selected PC serial slogans)
and select the communication rate “115200” (default value), and click
“Confirm”. as shown in Figure 1.
Figure 1： RS232 Selected
If the connection is successfully established, the icons in the toolbar
are lit up, as shown in Figure 2, indicating that the serial connection is
successful.