Product Specs

W
hen testing for emissions from the unintentional radiator
， the transmitter shall
be placed in the receive mode or idle mode， if possible. If receive mode only is
not possible then， the radio shall be passive (preferred) and/or active scanning.
In these cases ， this would need to enable activity on the communication BUS
(i.e.， PCIe， SDIO， USB) to ensure the unintentional radiator circuitry is
enabled. Testing laboratories may need to add attenuation or filters depending
on the signal strength of any active beacons (if applicable) from the enabled
radio(s). See ANSI C63.4， ANSI C63.10 and ANSI C63.26 for further general
testing details.