User's Manual

User’s Manual Wireless USB Adapter
18
Notes :The steps of using the Ralink Utility to connect a wireless network is the same as those described in
Windowns Xp .
In addition to station and AP mode,rhere is the Client + AP Mode to be selected in windows 8 as well.
Which means: other wireless devices connect to -> Soft-AP of the adapter -> the adapter (Client mode with
Internal ICS sharing )-> connect to other AP or router -> Internet.
This mode lets you use the adapter both as a Soft-AP and client at the same time. Switch to this mode,you can let
a wireless adapter be connect to a wireless (Soft-AP) with Internet connected, and let others adapter be indirectly
connect to Internet via the Soft-AP wireless network.
WPS SETTING
The WPS is equipped with PBC and PIN two kinds of connection mode. Make sure your router support
WPS function,
1) PBC Mode
Enables the router’s PBC mode. Press the WPS button on the router about 2 seconds , When the