User's Manual

User’s Manual Wireless USB Adapter
Page 11
In this utility, there are two applications can be
selected : the Station mode and AP mode .
 Station mode (Client mode ) : it is the default
access way , the USB wireless adapter services as a
client to acess Internet through other router or AP.
 AP mode : it sets the USB wireless adapter as an
AP,which allows the other users can connect to Internet
through your computer. Before using the mode, it must
be available that an existed Internet connection via wire
Ethernet connection or by 3G wireless connection.
Tips:Point the cursor to the Ralink icon location on
bottom-right corner of your computer screen, right click
the mouse, from the pop up list, you can select the
station mode or AP mode.
4) Below are the steps to connect to a wireless network
using the Ralink Utility.
a. Open the Ralink Utility by double-clicking on the
Ralink Utility icon in the taskbar.
b. The Ralink Utility appears ,by default connected to
an available open wireless network. Check the name of
the network to which you are connected. If this is the
correct network, no father steps are required.
c. To connect to an alternative network ,click the
Available Networks button.