SHENZHEN OGEMRAY TECHNOLOGY CO., LTD PRODUCT USER MANUAL 54M/150M/300M/433Mbps GWF-5B06 Wireless Wi-Fi Adapter User Manual Version:V1.
SHENZHEN OGEMRAY TECHNOLOGY CO., LTD PRODUCT USER MANUAL CONTENTS 1. Product Information 3 1.1 Product Introduction 3 1.2 Product View and Dimension 3 1.3 Main Parts Introduction 4 1.4 Main Features 5 2. Installation Steps 6 3. System Connection 9 3.1 Check Device Condition 9 3.2 Device Connection 10 4. Home Page Introduction 5. Device Mode Switch 13 18 5.1 Client+AP Mode 18 5.2 AP Mode 19 6. Agency and Approval 7. Environment Requirements 19 19 7.1 Temperature Range 20 7.
SHENZHEN OGEMRAY TECHNOLOGY CO., LTD PRODUCT USER MANUAL 1. Product Information 1.1 Product Introduction Generally speaking, most digital devices in your home are working under 2.4GHz frequency band. Too many devices working in the same frequency band may cause severe interference to make the speed on network become slow, to let you feel bad. GWF-5B06 Wireless Dual Band USB Wi-Fi adapter can make the choice between 2.4GHz band and 5GHz band become available, can do its auto-negotiation via 802.
SHENZHEN OGEMRAY TECHNOLOGY CO., LTD PRODUCT USER MANUAL The dimension of this adapter can be referred below(unit:mm): 1.3 Main Parts Introduction The following picture is for the main parts' names and part locations. 4*2 heat radiation holes: These 8 holes are located on the 2 sides of this device, 4 holes on each side. When the adapter is in working condition, these holes can radiate extra heat to protect the device from overheat and keep its excellent performance.
SHENZHEN OGEMRAY TECHNOLOGY CO., LTD PRODUCT USER MANUAL USB2.0 interface: This is the interface of this adapter. Energy saving and low power consumption. It is the connection between our adapter and target devices. Just plug and play. LED indicator: It is on the bottom of product front side for indicating product working state. Under connection situation, the indicator is ON, under working condition, it is blinking, under disconnection state, it is OFF.
SHENZHEN OGEMRAY TECHNOLOGY CO., LTD PRODUCT USER MANUAL 2. Installation Steps Installation steps of adapter driver program is same when it is installed in different operation system. Here takes the steps under Windows 7 for example to explain the installation process. 1. Double click the icon of installation package to start the installation. 2. Choose "I accept the terms of the license agreement" and click "Next". 3. Users can choose the installation type for the actual needs.
SHENZHEN OGEMRAY TECHNOLOGY CO., LTD PRODUCT USER MANUAL 4. An UI will pop up to prompt that the system is ready for the installation, then click "Install". 5. The system will show the installation processing bar. After the installation, another interface will show up.
SHENZHEN OGEMRAY TECHNOLOGY CO., LTD PRODUCT USER MANUAL 6. When installation process is done, system will remind this information. Click "Finish" will accomplish the installation and log out from installation wizard automatically. Notice: If you want to change the installation setup, please click "Back" to return to previous page to set it up again. If you want to quit the installation, please click "Cancel".
SHENZHEN OGEMRAY TECHNOLOGY CO., LTD PRODUCT USER MANUAL 3. System Connection 3.1 Check Device Condition After finishing the installation, users can find an icon on the task bar, this icon has the information that our product is not existed. Therefore, users need to plug our adapter into the target USB2.0 port. After plugging in, blue LED indicator on adapter will turn on. At the same time, icon will turn to to inform users that device is available but waiting for connecting.
SHENZHEN OGEMRAY TECHNOLOGY CO., LTD PRODUCT USER MANUAL Click "OK" can finish this step. 3.2 Device Connection 1. When device is working properly, please double click , or right click it and choose "Lauch Config Utility", users will find an UI like the following picture shows: 2.
SHENZHEN OGEMRAY TECHNOLOGY CO., LTD PRODUCT USER MANUAL 3. Choose the desired wireless netowrk name, the AP information of that network will be shown at the bottom for reference. Click a) will start the connection. If the encryption pattern is NONE, system will start auto-connection, and the basic information of that network will be seen on home page. b) If the encryption pattern is not NONE, users will enter "Profile Settings" page when click this wireless network.
SHENZHEN OGEMRAY TECHNOLOGY CO., LTD PRODUCT USER MANUAL d) Click to go to next step. If users input the correct key number, the connection will be done successfully. Left part is the basic informaton of the connected network. On the right part, is used to remark the connected one. 4. When the connection is established, LED indicator on device will keep blinking, and users can enjoy the connected network environment. Notice: on task bar is for knowing the connection situation. 1.
SHENZHEN OGEMRAY TECHNOLOGY CO., LTD PRODUCT USER MANUAL 4. Home Page Introduction Home page will display some basic information of the connected network, such as SSID, IP address, communication rate, channel, and subnet mask. We will explain the usage of those functional buttons in the red square frol left to right. 1. button:This button is for searching all usable wireless networks. By clicking it, a page will show all networks that users can use for check.
SHENZHEN OGEMRAY TECHNOLOGY CO., LTD PRODUCT USER MANUAL Follow and guide and click to finish the connection setup. Right click the selected network, users can get the 3 ways of network sequencing. Users can choose the preferred one to sequece the list for convenient check. Click can connect to network and enter the page of "Profile Settings"directly.
SHENZHEN OGEMRAY TECHNOLOGY CO., LTD PRODUCT USER MANUAL 2. button:Click this button can gain network link information. button: Showing the link information just like the page above s hows. button: giving some link data information, such like link quality, signal strength, transmit rate and receive rate. button: Providing some data information about some statistic information about transmitting and receiving.
SHENZHEN OGEMRAY TECHNOLOGY CO., LTD PRODUCT USER MANUAL 3. button: Users can enter "Profile List" page by clicking it. Click button, can add a network connection into system, users can refer to chapter 3.2 for detailed information. Click button, can delete the chosen network connection. Click button can do edit operation. Click button, can import some files into system. Click button, can export some files out from system. Click button can add a WPS profile.
SHENZHEN OGEMRAY TECHNOLOGY CO., LTD PRODUCT USER MANUAL 4. button: This button is for advanced setup.
SHENZHEN OGEMRAY TECHNOLOGY CO., LTD PRODUCT USER MANUAL 5. button: This button is for checking product version, MAC address information. 5. Device Mode Switch Here are 2 extra work modes for users to choose according to their actual needs and real situation: Client+AP mode and AP mode. Client+AP mode can make device connect WLAN and use itself as a Wi-Fi hotspot simultaneously; AP mode is for access point mode. 5.
SHENZHEN OGEMRAY TECHNOLOGY CO., LTD PRODUCT USER MANUAL 5.2 AP Mode Right click the device icon on task bar, users can see a pop-up list: Click "Switch to AP Mode", the cofiguration utility will be activitated and the home operation page will pop up. The device icon will turn to , and the operation method is described in chapter 4. Notice: If users want to turn back to client mode, just right click device icon and choose "Switch to Client Mode". 6.
SHENZHEN OGEMRAY TECHNOLOGY CO., LTD PRODUCT USER MANUAL This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. 7. Environment Requirements 7.1 Temperature Range Suitable working temperature range: -10℃~+50℃ Suitable storage temperature range: -20℃ ~+85℃ 7.
Specific Absorption Rate (SAR) information: This Wireless USB Adapter meets the government's requirements for exposure to radio waves. The guidelines are based on standards that were developed by independent scientific organizations through periodic and thorough evaluation of scientific studies. The standards include a substantial safety margin designed to assure the safety of all persons regardless of age or health. FCC RF Exposure Information and Statement The SAR limit of USA (FCC) is 1.