Shenzhen Ogemray Technology Co., Ltd IEEE 802.11 b/g/n WiFi Module Product Specifications Model: M05 Version: 1.3 2010-12-27 Information in this document is subject to change without prior notice.
Shenzhen Ogemray Technology Co., Ltd 1. Introduction GWF-M05 is a WLAN module supporting IEEE 802.11 b/g/n standards with 6-pin connector supporting USB 2.0 interface. This is a low cost compact WLAN module designed in the product with embedded system for the wireless connectivity. 1.1 Scope: GWF-M05 WLAN Module is designed to operate in 2.4GHz ISM frequency band, it applies a highly integrated MAC/BBP and RF single chip RT3070 with 150Mbps PHY rate supporting. It fully complies with IEEE802.11n draft 3.
Shenzhen Ogemray Technology Co., Ltd Bus Interface USB 2.0/USB1.1 USB Interface 6-pin, 2.0mm pitch male jumper , or 1.0mm pitch connector Antenna Impedance 50 ohm 2.2 Hardware Information GWF-M05 is low power consumption and low-cost compact WLAN module. This module can be built-in other embedded applications such as IP Camera, IP set top box, GPS, Internet radio apparatus. 2.2.1 Block Diagram Figure 1: System Block Diagram of GWF-3M04 5.0V WLAN Module Figure 2: System Block Diagram of GWF-3M04 3.
Shenzhen Ogemray Technology Co., Ltd 2.3 Software and system Information Operation System CPU Supplier Driver Linux 2.4/2.6 ARM, MIPSII Available Windows 2000/XP/Vista X86 Platform Available Windows CE 5.0/6.0 ARM, MIPSII Available 2.4 Mechanical Information 2.4.1 OUTLINE and USB Connection Information （40x18mm） a). 6-pin 1.0 mm pitch connector. b). 6-pin 2.0 mm pitch male jumper. Information in this document is subject to change without prior notice.
Shenzhen Ogemray Technology Co., Ltd (To be noted: For special application, the direction of the male jumper can be upside down mounted) 2.4.2 Pin definition: Pin 6-pin 1.0mm pitch connector 6-pin 2.0mm pitch male jumper 1 VCC (3.3 VDC or 5.0VDC) VCC (3.3 VDC or 5.
Shenzhen Ogemray Technology Co., Ltd GWF-3M05-33-T, for 3.3+/-5%VDC, the long pins are at the same side with the shield case. GWF-3M05-33-B, for 3.3+/-5%VDC, the long pins are at the opposite side with the shield case. GWF-3M05-33-C, for 3.3+/-5%VDC, Soldered with 6 pin connector. GWF-3M05-50-T, for 5.0+/-5%VDC, the long pins are at the same side with the shield case. GWF-3M05-50-B, for 5.0+/-5%VDC, the long pins are at the opposite side with the shield case. GWF-3M05-50-C, for 5.
Shenzhen Ogemray Technology Co., Ltd PARTICULAR PURPOSE OR NON-INFRINGEMENT. We uses reasonable efforts to include accurate and up-to-date information on this document; it does not, however, make any representations as to its accuracy or completeness of the information, text, graphics, links or other items contained within these materials. Your use of this Document is at your own risk.
