User Manual

11


 PlugintheUSBreceivertoyourPC/Laptop
PlugintheUSBreceivertoUSBportofthePCorLaptop,anditwill
installthestandarddriverautomatically.WhiletheUSBreceiveris
paringtheunit,the3ledslightupBlue.
 Selectthespeakeroutputthatsuitsyourenvironment.
Fordetails,referto"Selectingaspeaker"(page11).
 Adjustingthespeakervolume
Adjustthespeakervolumethatsuitsyourenvironment.

Tips:
 ConnectthisunittothePCusingthesuppliedUSBcable(wired
type).
 Keepthedeviceabout20cmdistanceawayfromtheUSB
receivertoavoidsignalinterference.(Wirelessanddaisychain 
type).
 Itisnotpossibletoconnectandusemorethanonemicrophone
orspeakerincludingtheproducttoonePCatthesametime.
 TheproductmustbeconnecteddirectlytoaPC.Iftheproductis
connectedtoaPCviaaUSBhub,itmaycauseoperational
problems.
 Inrarecases,theaudioplaybackmaybeinterruptedduetoPC
conditionssuchastheworkloadorlimitedfreespacein
memory.