Instruction Manual

BUILT‐IN USB QC3.0 FAST CHARGER
The unit has a built-in USB QC3.0 Fast Charger. Use it to charge the external Device
as below:
1. Connect the unit to the car cigarette lighter socket to power on the unit.
2. Connect the full size USB Plug of the charging cable (not included, to realize fast
charging, the USB charging cable must be a fast charging cable) from the USB QC
3.0 Port to the external Device.
3. Fast charging will automatically start. Monitoring the charging status by the
Charging Indicators on the external Device as usual.
4. When finished charging, disconnect the external Device from the USB QC3.0
Fast Charger Port.
BUILT
‐IN USB TYPE-C CHARGER
The unit has a built-in USB Type-C Charger. Use it to charge the external Device as
below:
1. Connect the unit to the car cigarette lighter socket to power on the unit.
2. Connect the USB Type-C Plug of the charging cable (not included) from the USB
Type-C Port to the external Device
3. Charging will automatically start. Monitoring the charging status by the Charging
Indicators on the external Device as usual.
4. When finished charging, disconnect the external Device from the USB Type-C
Charging Port.
Note:
The unit has a built-in overload/overheats protector. If the output of the unit is
overload (or short circuit). The charger will auto shut off. Unplug the external
Device from the USB QC3.0 or Type-C Port. The charger will auto reset.
8 December 31, 2019_V1