Instruction Manual

JX91
1 2
3
4
5
Stick Type TWS
Instruction manual
Product Description
1: Multi-function touch button
2: Earbud indicator/microphone
3: charging compartment indicator
4: Indicator light
5: Type-C USB charging port
Power on/off
Bluetooth pairing
Open the charging compartment and take out the earbud
to turn it on automatically.
Open the phone's Bluetooth connection interface, search
for "JX91", click pair, then the connection is successful
and accompanied by a tone.
Music
Music pause/play: During playback, short press the
multi-touch button.
Previous song: Double-click the left ear multi-function
touch button.
Next song: Double-click the right ear multi-function
touch button.
Multi-function
touch button
Call
Answer: When a call comes in, short press the multi-function
touch key.
Hang up: During a call, double-click the multi-function
touch key.
Multi-function touch button
(Answer/reject/hang up)
Charging
Charge the charging bin through the charging cable,
and the indicator light of the bin is always on when it
is fully charged.
Put the earphone into the charging compartment, and it
will be charged automatically. When the earphone is fully
charged, the indicator light of the earphone will go out.
Earbuds charging Red light is on
Earbuds is fully charged Red light is off
Charging compartment is fully charged
The light is always on
Charging compartment is charging
Red light is light up in sequence
Model: JX91
Bluetooth version: 5.2
Single earbud weight: 3.9g
Earbud size: 33.5*17*26MM
Earbud battery capacity: 3.7V/2*35mAh
Earbud charging time: about 30 minutes
Play music time: about 4.5 hours(Medium volume)
Support Agreement: SPP / HFP / A2DP / AVCTP / HID
Frequency: 2.4GHz~2.48GHz
Bluetooth distance: 10M
Power input: DC 5V/500mA
Charging bin to charge the earbud: 2 times
Charging bin size: 59*25*52mm
Charging bin weight: 40g
Specifications
Headset restore factory settings
When the headset is turned on, press the left/right
headset multi-function button for 5S at the same time,
the red LED on the headset flashes quickly 5 times,
and the factory settings are restored successfully.
Red and
blue lights
Alternate
flashing
Charging compartment battery capacity: 3.7V/300mAh
3
4
5
1
2
Power on: The headset will automatically turn on when the
charging compartment is opened, or manually press and hold
the touch button for 3S.
Power off: Put the earphone into the charging compartment
and close the cover. The earphone will automatically shut down.
If it is not connected to any device within 5 minutes, it will
automatically shut down.
After turning on, put the left and right earphones close to
each other. After the team is successful, the indicator light:
the main earphone flashes red and blue lights alternately,
and the auxiliary ear flashes blue light once every 5 seconds.
5 seconds
flashingblue
light once.
Manual power off: Long press the headset touch key for 5s to
manually shut down.
Wake up voice assistant function
(requires mobile phone support)
After successfully connecting with the mobile phone,
except during a call, long press the left ear touch key
for 3S to activate the voice assistant function (SIRI).
Reject: During a call, double-click the multi-function
touch key.
Game mode
Long press the right ear for 3s to enter or exit the
game mode.
FCC Statement
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference
to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
 Reorient or relocate the receivingantenna.

Increase the separation between the equipment andreceiver.
 Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

Consult the dealer or an experienced radio/TV technician for help.
Caution: Any changes or modifications to this device not explicitly approved by manufacturer could void your authority to operate this equipment.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
RF Exposure Information
The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction.
Label