Assembly Instructions

29
Faults and Solution
Fault
Possible Cause and Solution
Failure to switch
on
●The camcorder has low battery. Please recharge it
immediately.
●Check whether the operating environment
temperature is within 0~40°C.
Failure to switch
off
●If the ambient temperature is high or the camcorder
is used for an extended period, it may have
excessively high temperature. Please wait a
moment or use a clip/toothpick to gently press the
[RST] beside the slot.
Automatic
shutdown
●It’s normal that the camcorder automatically shuts
down after standing by for three minutes.
●Check whether the operating environment
temperature is within 0~40°C.
●If the camcorder is used for an extended period, it
may have excessively high temperature. Please
wait a moment and switch it on after it cools down.
Rapid battery
drain
●Battery performance degrades in low temperature.
Please use it after it is preheated.
●The battery is not fully charged. Please recharge it.
●If the situation remains, the battery has reached it
service life. Please buy a new battery.
Wi-Fi signals are
unstable
●The distance is too long. Please use it within 5m
(effective distance).
●The camcorder has low battery. Please recharge it
immediately.
●The wireless signals are interfered because the
camcorder is placed on a metal table or stand.
Keep it away from metal.
●The Wi-Fi signals of the phone are weak. Please use
another phone.