Assembly Instructions

4
●Wireless controller (Optional)
Name of Part
Functional Description
❶ Video button
Press it when the camcorder is in standby status
to start, stop video recording.
❷ Operating indicator
It flickers once when the Video/Photo button is
pressed.
❸ Charging indicator
It is solid while charging through USB cable and it
will go out after the camcorder is fully recharged.
➍Photo/Candid shot
Press it when standby to take a photo and press it
during recording to take a candid shot.
❺ USB port
Connect a USB cable for recharging.
●Please use the USB cable provided by the manufacturer to recharge
the wireless controller, and the charger should be 5V/2A.
●The controller response may slow down in case of low battery.
●The charging time is about 1 hour, and the standby time is about 1
week.
●The effective distance for operating the controller is about 5m for
video recording and about 5m for taking photos.
●The effective distance may vary in different battery statuses and
service conditions.
❶
❸
❸
❶
❺
❸
➍
❸
❶
➍
❸
➍
❸
❶
❷
❶