Troubleshooting Guide

22
3.
Touch the screen to select “Yes” or “No”.
Default Settings
If your camera is in abnormal mode, you can set this function to restore all the settings to
the factory default.
1. Press the mode button to enter the setting menu.
2. Select the icon
by touching the screen.
4. Touch the screen and select default settings.
5. Touch the screen to select “Yes” or “No”.
Connecting to the computer.
Prepare a USB cable.
1. Turn on the camera and enter standby mode.
2. Plug the USB cable to the USB interface of the computer and then plug another
side of the USB interface of the camera.
3. There are two options when you connect the camera with the computer: Connect to
the computer or used the camera as a webcam.
4. Swipe the Zoom button to select.
5. Press the photo button to confirm.
Note：We suggest you to connect the USB cable to the back of the computer, you
will see a removeable disk in your computer after you choose to connect to the
computer.