User Manual

This terminal is connected
to TV HD jack
This terminal is connected
to camera HD jack
HD
USB
2.7 Connect to PC
The camera can be connected to PC to transfer files, view and edit photos and videos.
1.Use one side USB cable to connect with camera, the other side connect to computer.
2.After connection, power on the camera . select “MSDC”, camera can use as U disk. Select
“PC cam” then camera can use as webcam. Please see below picture:
2.8 Connect to TV
The camera also can be connected to TV, the method is as follows:
1.Use HD cable to connect the HD jack of camera and HD jack of TV;
2.Switch TV HD jack to connected camera HD jack;
3.Power on the camera, all the contents will show on TV screen , at this time, users can
normally use the camera, and also can view the playback files by TV.
7
Notice:
Because of the computer system, when you select
the "PC cam" option,
Some computers need to download the AMCAP
software to use.
Connect the camera
USB interface
Connect the computer
with USB interface
2 Start to use