User Manual

5 Remaining video
time indicator
2 Motion detection
indicator
6 Battery capacity
indicator
8 Date/time indicator 7 Memory card
indicator
9 Zoom indicator
3 Use the camera
This chapter helps you understand how to use the various advanced features of the
camera.
3.1 Video Mode
After the camera is turned on, it will enter the video mode automatically, and there will
be some icons shown on the screen , the meaning of icons is as follows:
1Video mode indicator 4 Video Size indicator3 Interval recording
indicator
3.1.1 Video Recording
In video mode, users can shoot videos and can also set various menu features and parameters.
1.Insert memory card , short press【Power】key to power on the camera;
2. The camera automatically enters the video mode after the camera is turned on, or press
【Mode】key to switch to the video mode, at this time, the icon” ”will appears in the top left
corner of the screen.
3. Select and adjust the target according to the image displayed on the screen, hold on the
camera firmly, and press【Video】key to start recording video.
4. During recording, the red icon on the upper right corner of the screen continues flashing.
5. If the memory card is full, "memory is full" will be shown on the screen and the camera will
stop recording automatically. At this time, please change a new memory card, or delete the
files in this memory card to continue recording.
3.1.2 Movie Size
This function can set the resolution for shooting the video, and the higher the resolution, the
bigger the video file and the more storage space it takes up.
1. In video mode, press 【Menu】key to call out the menu, press【Down】key to select "Movie
Size"icon;
2. Press【OK】key to enter into the sub-menu of “Movie Size”;
3. Press【Up/Down】key to select desired resolution:
4K/24fps，2.7K/30fps，1080P/60fps，1080P/30fps/，720P/60fps，720P/30fps.
4.Press【OK】key to save and back to menu, press【Menu】key again to back to video mode.
This function supports touch operation:
1
2
3 4
5
6789
9
3 Use the the camera