User Manual

6
2.4 Power on and power off the camera
1.Install the battery, short press【Power】key to power on the camera;
2. In the state of boot, long press【Power】key to power off the camera;
3. The camera supports the function of power on/off the camera via open/close the
screen; unfold the screen the camera will power on automatically; fold the screen the
camera will power off automatically.
4.The camera support the function of power off automatically. When the camera is not
in use for long time, camera will be powered off automatically to save battery. When the
battery is low, the screen will shown “Low battery” and shut down automatically later.
2.5 Switch working modes
2.5.1The camera support three working modes and one setting modes.
Video mode: “ ”will show on top left corner of the screen, at that time camera can
record videos and set relevant parameter;
Photo mode: “ ”will show on top left corner of the screen, at that time camera can
take photos and set relevant parameter;
Playback mode: Playback the photo/video file. If the current file is photo file, “ ”will
show on top left corner of the screen, If the current file is video file, “ ”will show on
top left corner of the screen, at that time camera can playback photos or videos and
make related operation;
Setup mode:“ ” will show on top left corner of the screen, in this mode users can set
the system parameter.
2.5.2 Switch working modes
Press【Mode】key can switch working modes: Photo mode/Video mode/Playback
mode, related icon of each mode will show on top left corner of the screen.
2.6 Instructions of remote control
Camera also can be operating by remote control; key functions of remote control are
as below:
Diagram of remote control
receiving window
Remote control diagram
Remote receiving
window
Photo Key
IR light Key
Launch window
Video Key
Pause Key
Zoom in Key
Zoom out Key
Up arrow
Mode Key
Down arrow
Delete Key
Play/stop Key
Back forawardKey
Down Volume Key
Up Volume Key
Fast forward Key
2 Start to use